CA48's latest activity

  • CA48
    Left to Right 6 Grendel 105 Berger 2.380 (basically 6 ARC) 25 Grendel 131 ACE 2.580 6.5 Grendel 123 SST 2.250 (factory) 6.5 creedmoor...
    • 3ACBD757-F47C-4A56-A968-9984236AB52E.jpeg
    • A790F9C5-3A9A-49DD-858B-29AEAE43D6F5.png
  • CA48
    CA48 replied to the thread Rem 700 LA CIP BM.
    Thanks for the help guys I didn’t realize the hunter version wasn’t out yet. Talked to my smith and he’s just going to mill a Hawkins...
  • CA48
    CA48 replied to the thread Absolute Hammer load data.
    If I can find N555 Il try it out. I did a little more testing today and ended up with 59gr of H4350 -.001” 3780 fps This load averaged...
  • CA48
    CA48 replied to the thread The 25 sst...up and running.
    You’re correct Doc my mistake, H4350 is a single base powder.
  • CA48
    CA48 replied to the thread The 25 sst...up and running.
    There’s no way to know without testing it. H4350 is a double based powder with a higher burn temp than H1000. What I can tell you is...
  • CA48
    CA48 replied to the thread The 25 sst...up and running.
    I think my local store has N555 Il give it a try if they do. Went out this morning to verify my 59gr load of H4350 at -.001” and try a...
    • 48C45864-92E9-494A-9AAC-06C534D85A29.jpeg
  • CA48
    CA48 replied to the thread The 25 sst...up and running.
    Did some testing with the 90gr Absolute Hammers yesterday. 25SST 26” 1&7 CBTO 3.261 -.001” COAL 2.750 NT .001 Fed 210 ADG Brass 87*...
  • CA48
    CA48 replied to the thread Absolute Hammer load data.
    Did some testing with the 90gr Absolute Hammers yesterday. 25SST 26” 1&7 CBTO 3.261 -.001” COAL 2.750 NT .001 Fed 210 ADG Brass 87*...
Top