Recent content by bushmotornv

  1. B

    PCP air gun

    Where did you get your 6000 psi tanks? I checked with my local welding supply house and was told that I was not qualified or trained in their use, therefore they would not supply me with the cylinders! Really irritated me as I've been working on high pressure accumulators for 30+ years! Thanks...
  2. B

    Need a recipe for 6.5 PRC

    ☝️This is from Berger, and it includes the 153.5 as well.
  3. B

    Weatherby Mark V (Germany) 7mm WBY Mag - 7mm REM Mag Fired Through It - "Won't Shoot Strait" - Weird Obstruction?

    Just for future reference, sometimes you can use a bronze bore brush as a poor man's stuck case remover. Find a brush that will fit the case body snugly. Insert your cleaning rod from the muzzle and screw on the brush in the open action. Pull the brush into the case body. The brisles of the...
  4. B

    FedEx

    You'll have to make a claim with the shipper. I've had FedEx say it was delivered, only to deliver it several hours later. Last package that was lost, I had to make claim with shipper who made a claim, and then shipped my replacement 3 weeks later, only to be told FedEx could not deliver due to...
  5. B

    Peterson Brass Article - New Caliber Development

    I'm not sure the "exact" alloy is as critical as the steps involved in forming the cartridge case, both of which are most likely proprietary.
  6. B

    Has anyone tried 270 grain EldX out of 338 Edge

    I asked Hornady about the ELD-X's and the ELD-M's in the 338 RUM and was told it was not a long range cartridge and therefore there were no plans to develop load data for those bullets in this cartridge.
  7. B

    Has anyone tried 270 grain EldX out of 338 Edge

    Hello, just following along. I've got a 30" Bartlein in 338 RUM. I've only put 19 rounds downrange, so this gives me a place to start. I've gathered a pretty good selection of bullets to choose from. 300gr Berger, 300gr Sierra, 300gr Nosler ABLR, 300gr Hornady A-tips, and 285gr Hornady ELD-X and...
  8. B

    1/2x28 30cal side port muzzle brake

    Check out the Kelbly Klaw. I've got two in 7mm. They work great!
  9. B

    Easy at home zero stop for Sightron S-Tac and SIII, and not the pvc ring

    This is a great idea! However, I would suggest smoothing the cup point of the set screw so as to prevent the tip from gouging the contact surface under the turret cap, as set screws are designed to bite into the surface they contact to prevent movement.
  10. B

    6.5mm Craze? 264WM vs 6.5 SAUM vs 6.5 PRC?

    What is the "clicker" issue mentioned in several of the posts?
  11. B

    Least effective brake

    Is Vais still in business? Where can you purchase them?
  12. B

    Am I about to blow my face off?

    OBT nodes? I've not heard this term before.
  13. B

    Precision Micrometer die sets - your recommendations

    FWIW...the Redding competition die set has an outstanding micrometer seat die. However the micrometer bushing size die is a neck only size die. The set comes with a body die which,as the name implies, sizes the body. Personally, I recommend buying the Type S bushing full length size die along...
Top