Bman102250

I was playing around in quickload when I saw your post. I was able to run data for all powders except 4000 and assumed a 24" barrel...

Thank you everyone. I just looked at my preferred barrel manufacturers website and he offers 1-7, 1-9, 1-10, and slower. Sounds like...

While it is not .25-06, I am building a .257 WBTY with 1:7".

All about stability - run this calc and you will have your answer https://www.jbmballistics.com/cgi-bin/jbmstab-5.1.cgi

I built a 25-06 Ackley Improved with a 27" Bartlein same diameter as a regular Remington sporter. Got 257 Weatherby velocity in a very...

Browning had a period from 66-71 where they imported a ton of stock wood, some extremely high grade (Olympic grade shotguns, etc) and...

In addition to what you have get a good bore guide and use the boretech proof positive jags so you don’t get false positives from it...

Tap it out from the left side to the right. (your left as if you were holding the rifle). Use a brass punch on the top portion of the...

It takes only one man with an idea and determination to bring it to fruition and trials of life that make it possible. Len, you done good!

I have been using LC 30-06 National Match brass since the late 60's for my 25-06 AI , that Parker made up for me. My supply is coming...

So 25-06 and 30-06 are same length of 2.494" max length and 270win and 280Rem are same length of 2.540" max. Would be less trimming if...

You can change 30/06, 270, and it looks like 280 rem all can be resized to 25/06. I have 3 different 25/05 rifle persently and load for...

I had a similar experience many years ago trying to find 243 brass for my son's new rifle. I ended up necking down 308 brass and...

I’m a total 2506 supporter fanatic for the last 40 years… I have preferred necked down 270 brass over correct headstamped stuff…easy to...

Doughnuts WILL form in the necked down brass. Learn to deal with this issue, how to detect doughnuts and how to remove them...