Recent content by AggieHunter

  1. A

    Hornaday 180 grain 7mm ELD bullet

    Is anyone hunting w/this bullet? I have options Hornaday ELDX 175 grain, Berger 175 grain Elite Hunter or Nosler ABLR 175 grain? Thoughts?
  2. A

    Issues w/a Proof Research Barrel and a cold bore shot

    We have tried both scenarios. Same results
  3. A

    Issues w/a Proof Research Barrel and a cold bore shot

    There doesn't seem to be any issues but I do not have a good bore scope nor a procedure to test for "straightness" going down the bore. Suggestions? Other than sending it back to PF for analysis.
  4. A

    Issues w/a Proof Research Barrel and a cold bore shot

    Hornaday that was newly purchased - trimmed 20 thousandths, flash hole cleaned, mouth reamed inside and out. Weight sorted in 10 gram increments
  5. A

    Issues w/a Proof Research Barrel and a cold bore shot

    The scope I put on the rifle was a brand new Leupold Mark 5HD 5 x 25x 56. But yes I put another of my Leupold scopes on and same result.
  6. A

    Issues w/a Proof Research Barrel and a cold bore shot

    I just bought a brand new Proof Research 7mm 8 twist barrel, had my gunsmith put it on a Deviant Action with the idea of creating a 7mm wsm so we could use the Berger 168 grain VLD Hunting, Hornaday 180 grain EDL or Hornaday 175 grain EDX. After breaking the barrel as prescribed in their...
  7. A

    Federal Edge TLR discontinued?

    I'll try RL 16 to see what I get. Just playing around w/a different set up now. Thank you for the info
  8. A

    Federal Edge TLR discontinued?

    I'm getting 3134 FPS w/60 Grains of RL 22. My bullet length is significantly shorter that my traditional 140 grain Accubond - about 25 thousands less. But getting great accuracy
  9. A

    Federal Edge TLR discontinued?

    If you still have those 7mm 155 grain Federal TLR bullets, I would be very interested in buying them.
  10. A

    Federal Edge TLR discontinued?

    How much do you want for them? l live in Austin Texas
  11. A

    Federal Edge TLR discontinued?

    What was your loading recipe for the 155 grain Fed TLR if you don't mind me asking?
  12. A

    Federal Edge TLR discontinued?

    I was able to buy 2 boxes from federal on their website last week. But having one heck of a time getting them to fit in my 280Ack Imp. The bullets are 1.512" long and after I use my existing load data, they won't bolt in at all. Looking for answers
  13. A

    AR-15 build advice

    I just built a AR 15 in 300 Blackout w/10.5" barrell w/9" handrail, folding stock and a 2 MOA red dot scope. I also have a suppressor for it. I can shoot 140 grain supersonic and/or subsonic using 190 grain bullet. It folds up to 20" which is perfect to lay on the front seat and you can do some...
  14. A

    280 AI Velocity problems!?

    I have had a custom built 280AI for over 10 years. I use 140 grain Accubond. I use 7828ssc at 62.5 grain and I get 3200 FPS w/tremendous accuracy

Trending threads

Top