Leica 1600B Question

[coues7]

So when the 1600B give you the "elevation click values" do I have to divide by 4 for a 1/4 MOA scope with turrets? If so why the hell did Leica do this? When I start hearing "clicks" I translate that to "I don't understand MOA so I have to tell you how many clicks"

 

[Sika Slayer]

I would like to know the answer to this question as well

 

[kcebcj]

Page 38 in the user manual you can choose one of the output formats below:

-EHR or
-Hold or
-1-1 (1MOA) or
-1-3 (1/3 MOA) or
-1-4 (1/4 MOA) or
-10mm or
-5mm.

I use the EHR only and work off a drop chart or the iPhone. Hope this helps.

 

[bbowles]

Unless I am misunderstanding your question I believe your answer is on page 38 of manual. I have one of these units and can set it to give me output in actual "clicks" needed for MOA (1, 1/3 or 1/4). The 1/4 MOA gives you the number of "clicks".

What I would like to see in this unit is a dot for more precise aiming. Seems the square is not accurate enough sometimes.

 

[Sika Slayer]

Page 38 in the user manual you can choose one of the output formats below:

-EHR or
-Hold or
-1-1 (1MOA) or
-1-3 (1/3 MOA) or
-1-4 (1/4 MOA) or
-10mm or
-5mm.

I use the EHR only and work off a drop chart or the iPhone. Hope this helps.

What does -EHR mean ?
and in the -1-1(MOA) mode would you get a reading like say (16.25 M.O.A ) for example, just don't want to divide the clicks by 4 as my phone gives fractions of M.O.A readings.

 

[Quigley_Sharps]

What does -EHR mean ?

Equivalent Horizontal Range

 

[porkchop401]

Equivilant horizontal range.
I feel your pain but after a few salutions the clicks are a non issue.