6.5-284 vs 284win

Kroberts

Well-Known Member
Joined
Sep 17, 2013
Messages
92
Once I get out of college and get settled in I plan to build a long range hunting rifle off of a Savage action. For what I want the 284 win is the cartridge base that I want to work off of. This is because of it's efficiency, accuracy record and with both still showing enough energy to take a whitetail at half a mile. Either one I go will be put in 30-32" tube and twisted to handle the heavies. For me the debate comes down to the 284 win with its better barrel life and larger pill for more consistent down range on game performance. Or the 6.5-284 for better flatness and quicker flight times. If the numbers I entered into the ballistic program are correct then it seems that at 1000 yards in a 10 mph wind there is only about .2 moa windage difference, so small enough I'm not concerned with it.

For a background in my shooting. I typically shoot about 3-500 rounds in a year while in school, so all during the summer months, so when I get out of school I will probably shoot more often. My shooting pace normally takes about an hour or more to shoot 20 rounds. My typical shooting distances are from 700-1000 yards, and will try playing further if I can find ranges long enough. When loading I will try finding the upper velocity node with slow burning powders. If it matters at all in the decision, the cartridges that the guys I am shooting with are shooting a 7mm rem mag, 300 win mag, and a 338 edge. I am currently shooting a factory Savage 243 win using 58 gr bullets and am not happy when I can't hit 1/2 gallon milk jugs at my 725 yard berm with most shots.

So knowing all that which do you all suggest I go with? I have a little while to make my decision since I won't graduate till the fall, but would like to start working on gathering components. If there is anything else you would like to know just let me know. Sorry if this was a long read, I just wanted to give all the info I could to help with the decision. Oh and I'm not very recoil sensitive for being a small framed guy and I will be building off a long action, so any other good cartridges you can think of in the 6.5 or 7mm range would be appreciated. Thanks.

Thanks,
Kyle
 
did you try anything heavier in that 243 like 80gr. To 100 gr. It might be more consistent at longer range I would Ackley improve that 243 before I would go to a 6.5 the 284 is a good choice in the 7mm I would go with the 280 Ai if I wanted a 7 without the belt and good barrel life
 
I'm going to try some 90 gr precision ballistic bullets this summer to help me reach 1000 yards. My initial plan was to rebarrel to a faster twist 6 mm to handle higher bc bullets but since I'm going to rebarrel anyway I figured I would get a chambering for a larger caliber and chambering while I'm at it. I looked into 6mm wildcats based off the 243 win, like the ackley and the 6mm slr but decided that in the end I needed a little more bullet weight since for a few years it will be my only long range target and hunting rifle. If it was only going to be target I would def. get one of the fast twist 6m.
 
Although I disagree on the 243 even 243 AI vs the 6.5 I do believe the 280AI is a nice set up for 7mm. Don't misunderstand, the 243 is awesome especially in AI.

However, I have put 1500 rounds through my 6.5-284 and it is great cartridge with a high BC bullet. I am not sure what the 30-32 barrel is going to do for you but I would guess 3050-3100 with a 140 Berger. The 6.5 can use a 160 Matrix bullet with .680 BC for larger game and if you can get 2900 with the long tube that would very good.

Whether you go 6, 6.5, or 7 is all up to you and the platform you choose to shoot from. Each has its limitations.
 
I like my 284 Win very much, but the 6.5-284 is a great cartridge on it's own. Both are somewhat of a specialty round, you better plan ahead or be a reloader for ammo.

The talk of super long barrels and 500+ yrd shots on game looses me though. I wouldn't want to lug around that long of a barrel & I like shots with a very high likelihood of the outcome. I'm not saying it can't be done with preparation and practice.
 
IMHO, the only advantage the 6.5-284 has over the 284 is it has less recoil. Factor in barrel life, more energy and I think the 284 more than makes up for it.

168 VLDs can be fired at the same velocity as 140s in the 6.5-284. They have nearly equal BCs (slightly higher for the 168). Same trajectory, same wind but more energy and a bigger hole in the critter. Comparing the 160 6.5 versus the 180 7mm the 160 wins in the wind by 2" at 1k/10MPH, 4" of drop but the 180 delivers more energy.

For me the choice is simple. 284.
 
I have been reloading for a few years now, so as long as I can get components the ammo issue isn't really a big deal for me. And if need be I'm getting into paper patch bullet casting to get by with if I can't find any jacketed bullets. The heavies in each caliber are what I plan to play with. The 140-160s in the 6.5mm and the 180-190s in the 7mm if that makes a difference. I'm hoping that Berger will come out with the 195s soon if I go the 7mm so it would be twisted for them. I actually want the gun to be long barreled and heavy since it will be a specialty long range rifle since I have a win model 94 in 30-30 for my close range hunting gun, which really is 99% of my hunting. I'm after something that I can play with around and past 1000 yards without the expense of the larger magnums and the energy to effectively take game out there a ways too. I know the velocity will be getting on the low side with the higher weights but the higher BC should make up for that and is why I want a 30 some inch barrel to try bringing the velocity back up a little.
I've just been jumping back and forth on caliber and chambering since I got the idea to rebarrel into something larger. I'll think I want something for a while, then switch to something else.

From how it seems though, the 284 win is sounding like the better choice.

Kyle
 
I have both, i shoot the 160s in the 6.5x284, and 162 amaxs in the 284 win. My 284 win is throated and twisted for the 195 eol, but they havent come out so i went to the 162 amaxs, which shoot well, way under .5 MOA at 100 yards.

The 6.5x284 is a savage f-class with a hs precision stock, 30" barrel. 160s are going about 2650 fps at the muzzle with 52.5 grains of retumbo (rifle has a very long throat, work up!!) the last time i checked. And shoots three shots about .3 moa at 100 yards.

The 284 win is using 52.8 grains of H4350 under the 162 amax in necked up lapua 6.5x284 brass. Muzzle velocity is 2875 fps from a 26" bartlein barrel, 1:8 twist, 5 shot groups under .4 MOA at 100 yards.

I have taken three animals with the 284 win, and brother has taken one. 560 yard whitetail doe at 560 yards, through the front shoulder, DRT.

Mule deer buck, 520 yards, 20 mph wind, little far back, he went 30 yards and started tumbling down the hill.

Antelope buck 330 yards, 15 mph wind, double lung hit, went 20 yards and flipped.

5x5 elk, 168 Barnes LRX, 255 yards, double lung, went about 60 yards and piled up.

I would go 284 win over the 6.5x284.


This weekend i will try to do some shooting at 1600 yards with the 284 win, weather permitting. Let me know if you have any specific questions.

Riley
 
Weird, just weird you guys are getting more velocity out of heavier bullets in the same case.

I shoot 160 Matrix at 2730 out of a 24" savage. I will see how they do in a few weeks in the schneider 27", but i fully expect 2800.

I struggle to see a 168 7mm pill out of the 284 going the same speed as a 140 in a 6.5-284. I guess I need educated on the physics of this. Does the 7mm handle more pressure and powder and therefore able to push a heavier pill at the same velocity?

If so, I might lean toward a 280 AI for my next build to shoot 168-180. Although the BC of a 160 matrix is higher at .680 vs .617 of the 168, the 168 equals the 140 and at the same velocity will deliver more energy and buck the wind better. I like the wind bucking component mostly.
 
Weird, just weird you guys are getting more velocity out of heavier bullets in the same case.

I shoot 160 Matrix at 2730 out of a 24" savage. I will see how they do in a few weeks in the schneider 27", but i fully expect 2800.

I struggle to see a 168 7mm pill out of the 284 going the same speed as a 140 in a 6.5-284. I guess I need educated on the physics of this. Does the 7mm handle more pressure and powder and therefore able to push a heavier pill at the same velocity?

Bigger bores generate less pressure at equal velocities with equal bullet weights with equal barrel lengths. A 300 win mag will deliver 180s faster than a 7mm-300 win mag with 180s. Obviously the 7mm has higher BC potential with the 180s. When you step up to the 30 cal. 200 hybrid, the playing field is a little more level. Similar velocities with similar BCs. Smaller bores concentrate pressures more with the constricted area.
 
Thanks for all the info. It definitely sounds like the 284win is the way to go. Hopefully if won't be too long after I get the rifle built that the 195 eol makes an appearance. I called up Berger about them a little while back and they told me to get ahold of them the beginning of next year and see where they are with getting them out. It sounded like they are just too back logged on getting everything else out to work on production of something new.

Kyle
 
Warning! This thread is more than 10 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top