h5010

Bobby Mickey

New Member
Joined
Apr 6, 2014
Messages
1
I found 10 Lbs of H5010 at a good price but cannot find any loading data. I load for 338, 300WM, 30-30, 222, 30 Carbine, 44mag, 38sp, 9mm lug. Any HELP out there?
 
I found 10 Lbs of H5010 at a good price but cannot find any loading data. I load for 338, 300WM, 30-30, 222, 30 Carbine, 44mag, 38sp, 9mm lug. Any HELP out there?
H5010 is a 50 cal stick offering and is about as slow as dirt. The only one I'd think can use it would be your 300 win with 220 grain bullets. A charge around 85 grains should net you 2700-2800 fps with a 220. Work up to this of course. H5010 is a heck of a powder in the 7stw and either 7rum or 300rum. I have burned a good bit of it years past but my stocks of 5010 went bad. H5010 doesn't have that issue; mine was I5010.
 
there were a few different numbers for 5010 years back. there was also a T5010.
im not sure as everybody knew for sure exactly what it was so long as it worked.
h5010 should be a more modern variety if its packaged in a black jug.
i have an unopened jug also i bought about 20 years ago as a backup powder for
my 30x378. im currently using h50bmg in a large 338 and was told by bruce baer
the h5010 would work well in that also.
 
Warning! This thread is more than 11 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top