Load development

Akhunting

Well-Known Member
Joined
Dec 9, 2012
Messages
58
Introduction to me - I have been reloading off and on since I scrimped and saved for an RCBS Rockchucker kit when I was ~12 years old, about 25 years ago. I started reloading 30-30 and 300 Win Mag. Had good success for what I wanted back then. Since then I have reloaded ten thousand plus pistol and rifle loads and generally tried to key in on the most accurate load at a given distance. I ran out of time to reload for about the last 10 years and then started again with a .220 Swift that is as accurate as I need. I have also tinkered with a few other loads. I have ~20 different powders to choose from and a good sock of primers.

I recently bought a Weatherby Vanguard 2 in .257 Weatherby that I am trying to work up a load for withxffr good success but am wondering about the different thoughts on load development. Why decide on a powder, prime, or bullet over another? I have had good luck with most loads

Wanted: Rock Tumbler/Polisher (Entiat)
What are your
 
Warning! This thread is more than 11 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top