ConeTrol mounts and rings

Sully2

Well-Known Member
Joined
Feb 28, 2011
Messages
2,480
Location
Cincinnati, Ohio
Ive seen them advertised for "many a moon" but in more than 50 years never saw even 1 set on a rifle.

Anyone ever used them??..If so..good ..bad....indifferent??

Inquiring minds would like to know...
 
I have a set. They came with a used rifle/scope I purchased. They've worked well, but I have to disclaim that by stating I don't use that rifle a lot, the rifle doesn't have a muzzle brake, and the cartridge is a .280 RCBS 30 degree Improved. Anyhow, to the extent I've removed one scope and re-mounted another and then used the rifle off and on over a period of 10 years, the ConeTrol mounts have functioned without any noted problems for me.
 
Conetrol makes very slender and attractive rings. I would not use them for a heavy scope on a light magnum rifle. They are a little difficult install.

I would agree with this. The rings look great. They blend right in with the scope tube. And I will add that the scope I mounted in my Conetrol's was a 2.5-8x32mm Leupold Vari-X III. A very lightweight scope at about 11.5 oz. Not much of a durability test of these scope rings/mounts, compared to hanging a 22-36 oz scope in them.
 
Very good ring used them on a .375 H&H, heavy bullets, lots of rounds. A variety of scopes.

The variety of scopes part is probably why I don't use them any more, kind of pain in the set up phase. Excellent fit and machine work, good contact with the scope.

A common mistake is bearing down on the cone screws, and bending the little top cap.

I have seen them used to attach big scopes to big kickers, without complaint.

Also a very good looking ring.

Odd timing I just went through a file cabinet, and tossed a bunch of 30 year old material regarding use.
 
Warning! This thread is more than 11 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top