montana_native
Well-Known Member
-FN SPR Action, trued up with a Badger bolt knob installed
-McGowen, Stainless, 8-twist, Remington Sendero Contour barrel, 24.5" length
-Holland QD brake
-Lightly bedded into an OD green Manners T5A with pillars installed from Manners
-Factory FN PBR bottom metal – feeds like butter and includes two magazines
-Metal has been Cerakoted in black
-The Near base was trimmed to accommodate an XLR chassis at one time
All metal work was done by Young's Gunsmithing in Sand Coulee, MT.
No bipod, scope, level or rings are included.
There have been 189 rounds fired. It loves the 100 A-max and RL15. At 3175 fps it piles them into one hole with FC brass. I haven't worked much with anything else although I did shoot a 0.315" 3-shot group with 42.5 grains of H4350 and a 140 A-max at about 2780 fps.
I am selling for two reasons: 1. I want to upgrade the glass on my 300 Win Mag. 2. I have a 6mm AI that shoots just a little better and a little farther than this rifle.
Rifle must be shipped to your FFL. Knock $75 off for a FTF transaction.
-McGowen, Stainless, 8-twist, Remington Sendero Contour barrel, 24.5" length
-Holland QD brake
-Lightly bedded into an OD green Manners T5A with pillars installed from Manners
-Factory FN PBR bottom metal – feeds like butter and includes two magazines
-Metal has been Cerakoted in black
-The Near base was trimmed to accommodate an XLR chassis at one time
All metal work was done by Young's Gunsmithing in Sand Coulee, MT.
No bipod, scope, level or rings are included.
There have been 189 rounds fired. It loves the 100 A-max and RL15. At 3175 fps it piles them into one hole with FC brass. I haven't worked much with anything else although I did shoot a 0.315" 3-shot group with 42.5 grains of H4350 and a 140 A-max at about 2780 fps.
I am selling for two reasons: 1. I want to upgrade the glass on my 300 Win Mag. 2. I have a 6mm AI that shoots just a little better and a little farther than this rifle.
Rifle must be shipped to your FFL. Knock $75 off for a FTF transaction.
Last edited:
