300 imperial magnum what is it ??

denny r

New Member
Joined
Oct 19, 2011
Messages
4
i see one for sale and don't know anything about it...is it a wildcat/ or factory.. /are dies available or where can i find more info, this rifle is a sako m995 trg-s , and the price is right...THANKS,Denny
 
Last edited:
i see one for sale and don't know anything about it...thanks denny

The imperial is essentially necked down and formed from a full length 404 Jeffery case. The imperial precedes the RUM and is the idea in which the RUM was based. Performance will be comparable with the 300 RUM even though powder capacities may be slightly different between the two chamberings.
 
Exactly correct. I've had a 338 Imperial since before the Ultra Mags were introduced. They are excellent cartridges. I now use 375 Ultra Mag cases to form the 338 Imperial.
 
where can i find more info...i didn't explain myself first time around..did norma make this one?
 
where can i find more info...i didn't explain myself first time around..did norma make this one?

From an old friend of mine... Ret. RCMP Aubrey White the designer of the cartridge... it's a very fine design in any of its many calibers; Aubrey was way ahead of the times with this one.

Here's his email; [email protected]

North American Shooting System
11 Rose Place RR 1
Osoyoos, BC VOH 1V1
(250) 495-3131

Cheer's
436

 
"Origin & History

In the early 1980s Aubrey White and Noburo Uno of North American Shooting Systems (NASS) based in British Columbia Canada began experimenting with the full length .404 Jeffery by reducing the taper and necking it down to various calibers such as 7 mm, .308, 311, 338, 9.3 mm and .375. These cartridges were known variously as the Canadian Magnum or the Imperial Magnums. Rifles were built on Remington Model 700 Long Actions and used Macmillan stocks. Cartridges were fire formed from .404 Jeffery cases with the rim turned down, taper reduced and featured sharp shoulders.

Both Remington and Dakota Arms purchased the formed brass designed by Noburo Uno for use in their own experimentation and cartridge development. In 1999 Remington released the first of a series of cartridges virtually identical to the Canadian Magnum cartridges which featured a slightly wider body, increased taper, and shallower shoulders and named it the .300 Remington Ultra Magnum. Dakota too released their own version of the cartridge but chose not to turn down the rim and shortened the case to work in a standard length action. Remington would go on to design their own shortened versions of the Ultra Magnum cartridge which they were to call the Remington Short Action Ultra Magnum or RSAUM for short."

Here's a link. I used to own and shoot a .338 Imperial Magnum. That rifle is now a .338 Edge, which is the .338 Imperial with the shoulder pushed further forward by about 0.020".

.300 Remington Ultra Magnum - Wikipedia, the free encyclopedia
 
the 300 imperial was developed by a canadian there was 2 versions im not sure witch was first the 300 canadian or the 300 imperial, the 300 ultramag is a very close copy,i personally was going to build one but the ultra mag came out befor i could find a good left hand acrtion to use.
 
the 300 imperial was developed by a canadian there was 2 versions im not sure witch was first the 300 canadian or the 300 imperial, the 300 ultramag is a very close copy,i personally was going to build one but the ultra mag came out befor i could find a good left hand acrtion to use.

Cool! We have two claims, let's hear it! :D:rolleyes::cool:
 
i called the number on your comments about North American Shooting Systems, it said the number is no longer in service. Do you have another number for them, if not do you know who manufacturers the Imperial band of rifles and how much they might be.
 
i called the number on your comments about North American Shooting Systems, it said the number is no longer in service. Do you have another number for them, if not do you know who manufacturers the Imperial band of rifles and how much they might be.

I'll check and get back with you by PM
436
 
i see one for sale and don't know anything about it...is it a wildcat/ or factory.. /are dies available or where can i find more info, this rifle is a sako m995 trg-s , and the price is right...THANKS,Denny


It is most likely a wildcat and chamber dimensions can vary depending on the reamer dimension
and the designer.

The simple solution would be to check if the chamber could be set back 1/16th and if it would clean up using a 300 RUM SAMME Reamer.

The 300 rum uses the same case head size as a magnum and there should be plenty of brass in the future for the RUMs.

If you buy the 404 Jeffery cases you will have to turn the case heads down (Not an easy task) But if everything is close enough to the RUM and the case head is correct, all you have to do is fire form
with RUM Brass.

J E CUSTOM
 
Warning! This thread is more than 9 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top