Anyone know the recipe for Black Hills 6.5x284 142gr SMK loads?

huskerhunter

Well-Known Member
Joined
Mar 8, 2010
Messages
87
Hi,

Sorry if this has been hashed out before, I did a search and couldn't find anything. I bought two boxes of Black Hills 142gr SMK's for my new 6.5x284 for barrel break in to get started. Well I realized right off the bat that they were way hot--overkill for shoot one clean one. So I went ahead and loaded up some milder loads for break-in. I've been working up some loads with 142gr SMK's and have a decent 1/2 moa (three shots at 100) load at 43.5 grains of H1000, which is pretty mild and chrono'ing at 2850 fps from a 26" tube.

WELL, to make a long story longer, I tried the Black Hills today, and wham, 3 shots in a tight cloverleaf measuring just over .25" center to center. But they are HOT. 3040 fps and a slightly sticky bolt, no visible pressure signs on the primers though.

So I guess the good news is, it's kinda nice when a rifle is accurate with max loads. But I started thinking, what's the load? Could I duplicate and back off just a touch?

I'm also going to try some 4831SC as I know it's the preferred powder for the SMK's from what I read over on accurateshooter.com.

Anybody know the Black Hills recipe?

Thanks!
 
I was surprised when I called Cooper to get some load data for my new cooper M52 6.5x284 that they specifically told me not to shoot Black Hills ammo that it was way too hot. I went out today and was trying the 4831SC from 49-51 gr with 140 gr Bergers and was getting great groups at 50gr of 4831 SC at 2645fps in a 24' barrel. Will still try to work on up to 2850-2950fps. I used R22 last week Had ok groups but cleaning seemed to take much more that the 4831 SC did. Good Luck and work you loads up slow.
 
I was surprised when I called Cooper to get some load data for my new cooper M52 6.5x284 that they specifically told me not to shoot Black Hills ammo that it was way too hot. I went out today and was trying the 4831SC from 49-51 gr with 140 gr Bergers and was getting great groups at 50gr of 4831 SC at 2645fps in a 24' barrel. Will still try to work on up to 2850-2950fps. I used R22 last week Had ok groups but cleaning seemed to take much more that the 4831 SC did. Good Luck and work you loads up slow.


Thanks for replying and that's VERY interesting. I was realy wondering if they would make such a hot load in a "factory" round. But I guess it's so!
 
Warning! This thread is more than 12 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top