Hornady 225hpbt 300wm drop

shocking300

Well-Known Member
Joined
Jan 31, 2012
Messages
174
Location
wa state
Hello fellow shooters, what bc do you guys use for that bullet, if i use .670 it shoots high at all yardages . Hornady 225phbt 2890fps. Thanks
 
how much high and at what range? i can put it into my ballistic program and give you a new BC to try.
 
18moa was 1moa high at 880 yards . 22.5 moa was 2 moa high at 1000 yards . Sighted in 220 yards .Elevation 2500' temp 85f. scope hight 1.9". Thank you
 
I played around with it and you would need a BC of .770 to match the drop at 880 yards but a BC in the .8s to match the drop at 1000 yards. But when i entered in 2980 fps and kept the BC at .670 at matched both drops perfectly. I would switch your velocity to 2980 and leave the BC alone.
 
2980 is **** fast for a 300 win and a 225 hdy. That's all I push 'em in a 300 rum. Not sayin' it isn't possible, but ****. Good pill btw..

you are right i am not pushing them that fast i am only getting 2890 but thats what was suggested i use to match drop chart
 
What is your load? I could try adjusting the MV and BC at the same time and see what i come up with.
 
18moa was 1moa high at 880 yards . 22.5 moa was 2 moa high at 1000 yards . Sighted in 220 yards .Elevation 2500' temp 85f. scope hight 1.9". Thank you
how high were you sighted in at 220 yards? Are these the conditions you shot in, or zeroed? Or both?
 
Zeroed at 220 i know its weard distance but its where they have a target board and shot in these conditions. Thanks for your help
 
Where are you located? Reason I ask is the range I use has 220 yard target and goes to 1k but the shot angle is different for each distance and needs accounted for.
 
Warning! This thread is more than 12 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top