338 Edge Dies

Nomad

Well-Known Member
Joined
Jul 1, 2007
Messages
366
Location
Idaho
Looking for some place to get some 338 Edge dies. Have asked local sporting goods stores
and they are unable to help.
Just a stock set would be great.
 
For even cheaper and just as good, get a set of Lee 338 RUM dies and a 375RUM FL sizer of any brand (I got a cheap RCBS one on Ebay).

You'll use the Lee's for neck sizing/expanding, shoulder bumping, and seating. Take the expander ball out of the 375 and use it as a FL body die.

I have about $65 or less in my Edge dies and they work very well.
 
For even cheaper and just as good, get a set of Lee 338 RUM dies and a 375RUM FL sizer of any brand (I got a cheap RCBS one on Ebay).

You'll use the Lee's for neck sizing/expanding, shoulder bumping, and seating. Take the expander ball out of the 375 and use it as a FL body die.

I have about $65 or less in my Edge dies and they work very well.

Same hear but with hornady dies. Works great, much cheeper and easier to find.
 
I also got mine from shoot-long.com
They have been great. Very little runout. Brian's a good guy to deal with too.
 
For a seating die I plan on using a Forster Bench rest in 338 Rum. I might get the seater custom ground for the Berger OTM though I am not sure it really makes a difference.


Not sure what I'm gonna do for resizing. planning on using the new Bertrand brass so I may just neck size with a lee. A lee collet die in my CO-AX has turning out some concentric ammo.
 
Warning! This thread is more than 12 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top