Remington model 30-s douglas barrel/chamber advise

shepardswatch

Well-Known Member
Joined
Feb 1, 2011
Messages
55
Remington model 30-s douglas barrel in 22-250, need advise...
I sent a remington action and barrel in to be powdercoated. Now it looks as if the powdercoating was done without plugging the barrel muzzle or chamber.
I'm having good results getting it out of the bore...{thanks to some good advise from you guys.} How should I deal with the chamber??

Respectfully,
Shepardswatch
 
I would use a 1/4" x 14" brass dowl in a drill. Attach some gray scotch brite to the end of the rod, (wraped).
Insert in chamber and run for a few seconds then inspect. continue until removed.
 
I would use a 1/4" x 14" brass dowl in a drill. Attach some gray scotch brite to the end of the rod, (wraped).
Insert in chamber and run for a few seconds then inspect. continue until removed.

Great idea.... Thank's Jim, as alway's solid advise. E-mailed Kyle @
Brux, he said if i sent the barrel he could duplicate. May be an option
later if all this doesn't pan out.
 
Warning! This thread is more than 13 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top