Looking 4 a 7mm-300WM tight or turn neck reamer..

[tresmon]

Greetings,
I'm looking for a 7mm-300WM tight/turn neck reamer to ream a new barrel with. You do the reaming or I can. .313"ish ??

If one does not turn up, I could be persuaded to go 7mmRM turn neck...

Let me know,
Tres

 

[tresmon]

Any one?

 

[fariswm]

Any one?

Last year I built a wildcat 7mm based on the 300 WM cartridge. But it is not just a 300 WM sized down to 7mm. The shoulder angle is increased 10 degrees and the shoulder is blown our about .003. The neck is also pushed back to allow for a full .284 length neck.

Shoots very well with velocities comparable to a 7mm STW.

I have the reamer and while I wouldn't part with it I could be persuaded to loan it out it you are interested.

 

[J E Custom]

The 7mm rem mag is almost the ballistic twin to the 7mm/300 win.

The 300 is a little longer but the neck is shorter than the 7mm RM.

The 7mm will be easy to find or have made reamers and everything else is
easy to find for the 7mm RM.

J E CUSTOM

 

[FEENIX]

Try http://z-hat.com/

Reamer List

Good luck!

Ed