New Build 6.8 AR

forgrovem

Member
Joined
Feb 21, 2010
Messages
6
Location
phila,pa
I am just about finnished a 6.8 AR. Just waitng for a Magpul PRS stock. It has a White Oak stainless match grade 1/11 twist barrel with a mid length gas tube. The upper is a left hand Stag Arms receiver on a Stag Arms lower. The front grip is a free float 4 rail Yankee Hill lightweight assembly. Has any one come up with an accurate load for 115gr bullets? I want to try a couple of different powder combinations to find what is best for this system. I am having trouble finding current information on the web.
 
I am just about finnished a 6.8 AR. Just waitng for a Magpul PRS stock. It has a White Oak stainless match grade 1/11 twist barrel with a mid length gas tube. The upper is a left hand Stag Arms receiver on a Stag Arms lower. The front grip is a free float 4 rail Yankee Hill lightweight assembly. Has any one come up with an accurate load for 115gr bullets? I want to try a couple of different powder combinations to find what is best for this system. I am having trouble finding current information on the web.


Here is some data for 110 grain bullets which in my opinion are better. I shoot the 110 Vmax in my LWRC 6.8 exclusively with H322.

6.8SPC Load Data
 
I like to say thank you to cayotezapper, nomadpilot and Icanhithimman for your replys. I will start to research these sites soon. Again thank you.
 
Warning! This thread is more than 14 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top