30 Nosler vs 300WM vs 300PRC

Sooooo... the 5 i have shot andloaded for must A) have really slow barrels and B) must have a different pressure curve cus a norma ai in a 26 inch barrel 3045 with a 245 is about max maybe a little more... am i missing something ?? Ive never got a 30sm with 230s to shoot accurately past 2970ish.. and can barely hit 3100 with 570 if im lucky to.. but i wouldnt want too as that case isnt made flr those types of pressures. Your gojng to blow something up.. or your chono is lying to you

Kasey between 4 different barrels I've found very similar speeds between them all. Doubt it's my chrony since velocity lines up out to 2200yards.
 
To the OP with your needs your good go with any of those. Of course 300 win Mag is the most established but I would not build one of the other two just because it's hard to find components. If your patient and look around you can find brass may take a month or 2 but it can be done. Any of them will get the job done. Out of those you listed I would go 30nos. ADG brass is available right now. It will give the best velocity and fits in a L/A well.

I myself went with a 20" 30 Sherman Mag pushing 215s at 2950 fps with n570. Some think that's to hot but when I'm getting double digit brass life and am 2+ grains away from any sign of bolt lift I tend to ignore them. All my Sherman cartridges have done what Rich said they would and his customer service has been excellent. But I go into a build knowing I may not be able to run the highest velocity Rich tested. Brass has been the weak link and with adg or lapua where you can run 70k+ and still get 2-3 firings before pockets loosen up ( not that I run there) I don't think running just over 60k is unsafe on a Mag bolt face. I beleive a lot of that thinking comes from the past when norma was the best brass available. Sammi max is 65k psi.
 
Tell it to the Army.
This? 300 Norma Mag, 338 Norma Mag, and 7.62x51 NATO

 
I was contemplating the same thing. I had ruled out the PRC because, well Hornady but I found a great article on long range only about this. Bottom line the 300WM left nothing on the table to the Nosler (and presumably PRC) in terms of performance when loaded equally.

A long throated Nosler sounds like a great plan but it costs at least twice as much as the WM or PRC. Brass alone runs $2 each on the low end.
The MK248 Mod 1 chamber is bad to the bone in a 300wm. I suspect half the people spouting off about the army still running it don't know they had a second chamber specd and that's what they are primarily running now.

Wish I never would have sold mine!
 
The MK248 Mod 1 chamber is bad to the bone in a 300wm. I suspect half the people spouting off about the army still running it don't know they had a second chamber specd and that's what they are primarily running now.

Wish I never would have sold mine!
MK248 MOD0 ammo is not bad either, check out the accuracy average of 14 5 shot groups at 200.

Screenshot_20211207-191030_Adobe Acrobat.jpg
 
Last edited:
Heres some food for thought for the same few guys who criticize almost every single post I put up. Everyone knows who you are!
I'm so thankful that over 90% of the hundreds of clients are not only good people, but knowledgeable people as well. In your zeal to make Sherman look bad, you make yourselves look like the fools. What you're telling hundreds, actually thousands, of people, who hunt, shoot competively, load saami and wildcat cartridges, using the same technique, etc, etc, is that they are stupid and cant think for themselves but blindly follow a crazed Rich Sherman like a bunch of dumb sheep! Building Sherman Wildcats to this level has been a difficult, time consuming task that I never even planned on doing. Its also been a lot of Fun seeing people succeed and enjoy what Ive provided and the vast majority are very appreciative! I give my clients most of the credit for the success ive been blessed with!
So, the fact you seem to thrive on being negative, somehow makes you feel good, is foreign to me? Dont come across as being the saviour of all the stupid people by protecting them from Rich, because MOST people see right through it! Fauchism seems to be contagious!
So, My suggestion is, why dont I start a thread called "Sherman Bashing" and those of you who feel so obligated can post on there whenever you feel lead and not continuously waste everyone's time on numerous threads when the outcome is the same EVERYTIME! This makes a lot more sense to me!
Thread should be up soon:
 
Heres some food for thought for the same few guys who criticize almost every single post I put up. Everyone knows who you are!
I'm so thankful that over 90% of the hundreds of clients are not only good people, but knowledgeable people as well. In your zeal to make Sherman look bad, you make yourselves look like the fools. What you're telling hundreds, actually thousands, of people, who hunt, shoot competively, load saami and wildcat cartridges, using the same technique, etc, etc, is that they are stupid and cant think for themselves but blindly follow a crazed Rich Sherman like a bunch of dumb sheep! Building Sherman Wildcats to this level has been a difficult, time consuming task that I never even planned on doing. Its also been a lot of Fun seeing people succeed and enjoy what Ive provided and the vast majority are very appreciative! I give my clients most of the credit for the success ive been blessed with!
So, the fact you seem to thrive on being negative, somehow makes you feel good, is foreign to me? Dont come across as being the saviour of all the stupid people by protecting them from Rich, because MOST people see right through it! Fauchism seems to be contagious!
So, My suggestion is, why dont I start a thread called "Sherman Bashing" and those of you who feel so obligated can post on there whenever you feel lead and not continuously waste everyone's time on numerous threads when the outcome is the same EVERYTIME! This makes a lot more sense to me!
Thread should be up soon:
Im simply asking how they get those numbers when i run a long throat and dont see them rich..in the 10 ive done? Am i doing something wrong?
 
Top