Nosler cartridge on adl

laker

Well-Known Member
Joined
Dec 9, 2017
Messages
1,558
Anyone ever built one of the nosler cartridges on an adl setup? I've got an action, remington TI takeoff ADL, and all the ADL parts to build off of so was curious if it could be done or not
 
Times such as they are and looking like things aren't changing anytime soon, I'd leave that 7mm mag chamber right where it is...that 150fps ain't worth letting it sit there doing nothing. Later on when things ease up go right ahead...
 
Times such as they are and looking like things aren't changing anytime soon, I'd leave that 7mm mag chamber right where it is...that 150fps ain't worth letting it sit there doing nothing. Later on when things ease up go right ahead...
It's currently just an action.
 
Kelbys makes this.
Not sure if this one is a RUM but Redhawk has a RUM one.
Centerfeed also helps if they make an ADL one
 

Attachments

  • Screenshot_20211028-071907_Chrome.jpg
    Screenshot_20211028-071907_Chrome.jpg
    101.8 KB · Views: 56
You cannot get 3100 with a 215 in a WM you can in a 30 Nosler everthing being equal of course.
 
I had going to do this and decided to stick with 300WM but with improved case/shoulder. Water capacity is within 1 grain of the 30 Nosler case.

Kept the neck/shoulder junction in the same place so I can shoot standard 300WM.
Man that's a tall order to improve a case with 90gr powder to 100gr powder. I know my fired adg 30 nosler held almost 101gr water, 28N was almost 103gr. Peterson/adg have their 300wm brass spec'd at 89gr. A 300wm running 215 Bergers at 2950 with H1000 is a hell of an all around big game rifle that will have a long barrel life.
 
Top