• You must be a Supporting Member to create a listing in the Long Range Hunting Marketplace. To read all the rules, click here.

    We offer multiple options to become a Supporting Member here.

Pierce Engineering Stainless and Titanium Actions

rpierce

Official LRH Sponsor
Joined
Oct 8, 2009
Messages
811
Location
Waucoma, IA
Got a nice shipment of Pierce Engineering Titanium and Steel actions in.
Short Action 308 Bf and Long Action Magnum BF.
These actions are flawless.
Theyre perfectly straight.
Come timed perfectly for Triggertech Triggers.
.250+ firing pin travel and zero cock on close
20 moa rail with two anti shear pins and four 8-40 screws
Dual Pin Recoil Lug
Nitride coating
Dealer Pricing available on all products I sell.

I have manners eh1 stocks inletted for them as well as all the barrels, bottom metal, triggers, scopes, rings, etc. Take the parts to your local gunsmith. No waiting 6+ months on parts.

Steel actions are 1160 shipped
Titanium is 1600 shipped
pierce pic 1.jpg
pierce pic 2.jpg
 
Last edited:
What's the weight in each of the long action magnums - steel Vs ti?
 
Got a nice shipment of Pierce Engineering Titanium and Steel actions in.
Short Action 308 Bf and Long Action Magnum BF.
These actions are flawless.
Theyre perfectly straight.
Come timed perfectly for Triggertech Triggers.
.250+ firing pin travel and zero cock on close
20 moa rail with two anti shear pins and four 8-40 screws
Dual Pin Recoil Lug
Nitride coating
Dealer Pricing available on all products I sell.

I have manners eh1 stocks inletted for them as well as all the barrels, bottom metal, triggers, scopes, rings, etc. Take the parts to your local gunsmith. No waiting 6+ months on parts.

Steel actions are 1160 shipped
Titanium is 1600 shipped
View attachment 290579View attachment 290580
I've got a couple of John's actions. Top shelf for sure. You won't go wrong with a Pierce Action. Never tried his Ti actions. I sure do need a Magnum LA action too. Why did I even open up this forum topic this morning ? 🥴
 
I've got a couple of John's actions. Top shelf for sure. You won't go wrong with a Pierce Action. Never tried his Ti actions. I sure do need a Magnum LA action too. Why did I even open up this forum topic this morning ? 🥴
Give me a shout and Ill get ya hooked up. Im starting to run low on em.
 
Any with 16 TPI

I don't have any with that setup. Unless your running a prefit it doesn't matter. I had them do 18 tpi and identical bolt dimensions as a Kelbly so I could run the same programs on my cnc as the ones I have for Kelbly. I didn't wanna write all new programs for all the cartridges Im doing. I had the port size the same as a Kelbly so I could use the stocks I have on the shelf already for them. I could order a 16 tpi but it would be 3 months probably til it came in. Im also having them make me some skeletonized stainless actions for me.
 
I don't have any with that setup. Unless your running a prefit it doesn't matter. I had them do 18 tpi and identical bolt dimensions as a Kelbly so I could run the same programs on my cnc as the ones I have for Kelbly. I didn't wanna write all new programs for all the cartridges Im doing. I had the port size the same as a Kelbly so I could use the stocks I have on the shelf already for them. I could order a 16 tpi but it would be 3 months probably til it came in. Im also having them make me some skeletonized stainless actions for me.


Running prefit
 
Top