Powder for 300 wsm

This is what I am using for my 300WSM's Good for both Elk and Mulys. Last Elk taken at 387 W/ Range finder 1 shot, Last Mule deer taken at 480 1 shot.

Hells Canyon 300 WSM 168 Gr Barnes TTSX, RL17, Fed 215, 63 Grains, 0.021 Jump, Norma Brass

Titanium Mtn. 300 WSM 168 Gr Barnes TTSX, RL15, Rem 91/2 M, 58 Grains, 0.021 Jump, Norma Brass
 
I have tried 4064, with no joy, 4831 imr or H will work just fine in 150 to 180 group of bullets. OAL will be critical in the loads i tried. 50 for Barnes and 25 to 30 with everything else. This has worked for me and my 2 wsm's. Just my 2 cents worth.
 
4831 both IMR and H has worked fo me. I have found that OAL was very critical in the 2 WSM's i have. If using barnes, 50 to 60 off lands and 25 to 30 with everything else. This worked for me and just my 2 cents worth. Good luck and have fun.
 
in my Kimber Montana 8400 7WSM RL 26 sends 150 gr Hammers out at 3350 fps into one ragged hole - have shot faster but this was most accurate pressure free load.
 
180gr Accubonds with 68.0 gr of RL 22 has produced this group.
F9EDA646-D82C-485C-9D50-6E5F4CE10893.jpeg
 
Looking for recommendations for powder for my 300 wsm for 150 to 185 grain freedom seeds.ive looked everywhere trying to find any 4350 type powder with no luck. I have found imr 4955.magpro and superformance and imr 7828ssc powders instock are these good powders or should I keep looking? Or what would you suggest Thanks
I just put together a 300 wsm and developed a load using N550. 62gr pushing a 180 cutting edge lazer at 3058fps with Norma brass out of a 20" 1:10 barrel. It's shooting decent but I think I could still refine it and get a tighter group.
 
Looking for recommendations for powder for my 300 wsm for 150 to 185 grain freedom seeds.ive looked everywhere trying to find any 4350 type powder with no luck. I have found imr 4955.magpro and superformance and imr 7828ssc powders instock are these good powders or should I keep looking? Or what would you suggest Thanks
I like IMR 4831 and Reloader 17 with 150-180 bullets. I am using Reloader 22 with 190 in mine and getting 3,000 fps with it. Reloader 26 will push a 190 up to 3,150fps, but the extreme spread was over 80 fps. Reloader 17 is similar to IMR 4350, but it will give higher velocity.
 
I use superformance
Does anyone have a good load for Superformance loads for a 300 RSAUM? I asked Hodgedon and the technician said no data available.
I know that the OP is asking about the WSM but I just started working on a project with a Remington 700 LTR 20" barrel and 166 Hammer Hunter bullets.
 
Top