fabricator21
Well-Known Member
Any recommendations for an inexpensive rem 700 bdl s/a aics bottom metal
Magpul They are cheap but tough as nails comes as a kitAny recommendations for an inexpensive rem 700 bdl s/a aics bottom metal
i have a bdl stock that i want to convert to drop out magazine (aics)Any recommendations for an inexpensive rem 700 bdl s/a aics bottom metal
You'll probably only find M-5 inlet, not bdl. and they will cost what they cost.....
PT&G sells both. M5 and BDL and both are DBM. PT&G BDL bottom metal is pretty inexpensive (129.00). The Magpul is your best option price wiseAny recommendations for an inexpensive rem 700 bdl s/a aics bottom metal
I quit playing the PTG lotto years ago. They make good stuff....if they have it in stock, if they ship it to you in less than a year, and if its even the thing you ordered.PT&G sells both. M5 and BDL and both are DBM. PT&G BDL bottom metal is pretty inexpensive (129.00). The Magpul is your best option price wise
While I agree, I haven't had that experience. I've been lucky. Never had to wait more than a month for any item ordered. I have heard your story from others.I quit playing the PTG lotto years ago. They make good stuff....if they have it in stock, if they ship it to you in less than a year, and if its even the thing you ordered.
A lot of folks on here are saying you need to inlet for M5, but I believe that to be incorrect.Any recommendations for an inexpensive rem 700 bdl s/a aics bottom metal
I have used the Magpul bottom metal on a couple of build, and it works OK. Depending on the stock, it often has to sit proud of the stock for it to function correctly, and magazines often needs some tweaking to sit in toe correct location for them to feed.A lot of folks on here are saying you need to inlet for M5, but I believe that to be incorrect.
I have 4 rifles running the Magpul Hunter 700 DBM. 2 long, 2 short- all are standard bolt face. I had a 300win that ran this setup too- just bought the magnum magazine instead of the standard.
it's a lot more affordable than going the M5 route if you're on a budget and have a stock set up for BDL already. On 2 of my HS precision I did need to relieve some material from the Magpul with a file. It took 5 minutes and fits/functions perfectly when done. PM me if you run into any issues or have any questions.
all that said, I also will run M5 on a custom I'm building right now. This is because I bought a stock that was already inlet for it. I like the Magpul though- and have it installed on 2 full customs as well as 2 semi customs. Good luck!