28 Nosler Extraction problem

grandslamsheephunter

Official LRH Sponsor
Joined
Dec 24, 2017
Messages
139
Location
532 adamstown road
I have a controled feed action from Legendary Arms, Fired 2 shots and cannot extract the case, replaced barrel, same problem, Accurized action ,still same problem, Anyone out there experience the same problem with the 28 Nosler< Shot reloads, new ammo, Same problem????
Thanks Email me at [email protected]
 
I have a controled feed action from Legendary Arms, Fired 2 shots and cannot extract the case, replaced barrel, same problem, Accurized action ,still same problem, Anyone out there experience the same problem with the 28 Nosler< Shot reloads, new ammo, Same problem????
Thanks Email me at [email protected]
I have not experienced this with a 28 nosler but a 7mm rem mag. The chamber was rough. I polished it with some steel wool. It fixed the issue. 28 Nosler has less case taper. Im not saying a rough chamber is your problem but a rough chamber in a 28 nosler could be more likely to give problems than a case with more case taper.
 
Could be the ammo, ran across this recently with a 28 Nosler. Factory nosler ammo showing signs of too much pressure.
 
It's because the LAW Actions had so little primary extraction, just like a rem 700. Fix the primary extraction and it will tip that case out of the chamber
Danny, according to the serial you are correct for the 28 nosler. as the early recievers worked well, when the Nosler came out with the 28 ,the later receivers had better primary extraction,
 
Warning! This thread is more than 4 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top