RH300UM
Well-Known Member
Yes
4 great Hunting Cartridges
- Thread starter RH300UM
- Start date
Help Support Long Range Hunting Forum
Yes
RH300UM
Well-Known Member
Yes it does with H1000. I haven't tried any other powder with this bullet yet.
RH300UM
Well-Known Member
We talked about making the 338 RBH the same taper and head space just for the reason you stated and a little more case room.
no kidding!
surgeon260
Well-Known Member
- Joined
- Dec 18, 2017
- Messages
- 185
That's very impressive to say the least, especially with H1000. I have a 338 Norma improved built by Gradous. It is pretty much a min taper, max capacity design, throated for 300 Bergers. In my experience, that cartridge needs RL33 or N570 to shine. Looking back at my notes from a couple years back, I hit pressure with H1000 at around 2790-2810 fps, and that is with a 28" barrel. With a case full of RL33 I am over 2920 with great ES.
Not saying you can't safely hit 2850 with H1000 in a shorter barrel, just providing another data point.
Here is what my fireformed case looks like for comparison:
I have the 300 RBH and Travis has designed a great round and builds one hell of a rifle. The numbers in the first post are not inflated for each caliber, if anything there a little conservative. I'm getting 3160 fps with 230 grain Berger's and the rifle is easy to shoot, recoil feels just like a 300 WM Ridgeline with side discharge brake that I'm breaking in for a friend. My rifle weights 9.778 lbs. I would recommend anybody that likes to push heavy pills at good velocity's and have the round fit in the mag box with 3 down and 1 in the pipe to get on Travis's list.
Attachments
Wolf76
Well-Known Member
Those are solid velocities. Definitely cool looking.
What would you say the advantage is with this cartridge over a 338 edge?
What would you say the advantage is with this cartridge over a 338 edge?
surgeon260
Well-Known Member
- Joined
- Dec 18, 2017
- Messages
- 185
Fits into a magazine. Better brass (Lapua).
I don't know the 338 edge but just looking at the numbers from both Rbros and Defensive edge websites it takes a 30" barrel to get the same velocity as the RBH with 24"-26" barrel with 300 grain Berger's.
The RBH Cartridge Family – R Bros Custom Rifles | Hunting Competition Tactical Rifles
R Bros custom long range lightweight hunting rifles are the best, period. And we're affordable.
338 Edge Loading Data
Defensive Edge is Long Range Hunting, From Custom Rifles to Long Range Hunting Classes.
D
Deleted member 102985
Guest
My edge fits in the Wyatt's extended box with 300 Berger. I also have ADG brass. Every bit as good if not better than lapua. The biggest benefit I noticed was the velocity out of a 24" pipe. Makes a huge difference when packing in 8 miles on horseback or pack hunt.
RH300UM
Well-Known Member
I had a 338 edge for a few years. That 30" barrel got to be a PIA. Also the weight that goes with that barrel was a decision maker for me. It started me on this endeavor 10+ years ago to find a better cartridge and rifle combo that is more hunter friendly but still has horsepower.
Wolf76
Well-Known Member
I asked the question because the numbers posted above are marginally (+-30 fps) different than my 26" barreled edge.
Trying to figure out the niche for the new cartridge.
Trying to figure out the niche for the new cartridge.
surgeon260
Well-Known Member
- Joined
- Dec 18, 2017
- Messages
- 185
The case is much shorter. It gives you many more magazine options (eg. AICS DBM), vs the Edge/RUM case which will be limited to a Wyatt's box. Performance wise it's pretty much a wash.
TMR
Official LRH Sponsor
I designed the cartridges to be able to duplicate or exceed RUM/Edge performances, yet be able to keep them as a repeater with today's longer bullets. The 338 for example, I can run 300gr Bergers as a repeater easily and get just over 2900fps in a 26" barrel. In all the years of building 338 Edges (close to 200 of them), they will run 300's at around the 2900 mark in a 30" barrel, 2850ish in a 28" barrel and are under 2800 in a 26" barrel. That's not to say that there isn't rare fast barrel out there or guys are pushing things to get the speeds. I will be bringing out another 338 eventually that is based on the 7mm and 300 RBH case design. It will add a few more grains of case capacity bumping up the performance more.
The case capacity on the RBH cases is virtually identical to the RUM/Edge cases, yet a guy can utilize all the case capacity rather than having the bullet take up so much room. The numbers Robert mentioned in the beginning are not the max velocities. I have run my 300 RBH up to just over 3300 with 230's before hitting pressure in a 26" barrel. My personal rifle runs 3198fps with an ES of 4 with the 230 OTM out of a 26" Proof carbon barrel. I'm on my 6th firing on the brass and primer pockets are still like new. The 7's we ran 180's up to 3450 before hitting pressure signs. Problem is, these light rifles are violent and hard to shoot at those speeds, that is why we have them throttled back. Much easier to shoot and easier on components. If anyone has any questions they can email me at [email protected] since I don't get on the forums much.
The case capacity on the RBH cases is virtually identical to the RUM/Edge cases, yet a guy can utilize all the case capacity rather than having the bullet take up so much room. The numbers Robert mentioned in the beginning are not the max velocities. I have run my 300 RBH up to just over 3300 with 230's before hitting pressure in a 26" barrel. My personal rifle runs 3198fps with an ES of 4 with the 230 OTM out of a 26" Proof carbon barrel. I'm on my 6th firing on the brass and primer pockets are still like new. The 7's we ran 180's up to 3450 before hitting pressure signs. Problem is, these light rifles are violent and hard to shoot at those speeds, that is why we have them throttled back. Much easier to shoot and easier on components. If anyone has any questions they can email me at [email protected] since I don't get on the forums much.
