Browning x-bolt 6.5 creedmoor, help

wesg93

Member
Joined
Apr 7, 2020
Messages
11
Location
Virginia
I have a browning x-bolt hells canyon 6.5 creedmoor with 26" barrel with a Leupold vx-6hd 3-18x44. Bought last November, shot excellent out of the box had it shooting sub moa in just a few shots. Between December-March shot approximately 200 rounds, shooting pop cans at 500 and 600 yards consistently, very pleased. Fast forward a few weeks end of March to April and now I can't get it to group at 200 yards anymore. I haven't changed anthing, I've been shooting factory hornady eld match 140. Could the warmer temperatures be affecting it that much. I've checked scope mounts everything is tight. I'm lost and pretty frustrated. Any ideas or thoughts? I included a picture from my previous 200 yard group
 

Attachments

  • Snapchat-570394821.jpg
    Snapchat-570394821.jpg
    186.3 KB · Views: 552
Check the gaurd screws first, then the barrel channel, and then the bedding. Has the gun taken any nasty falls? Could something have happened to break the scope? I have four of the Vx6 and have never had one lay down on me, but everything mechanical can fail.
 
Check the gaurd screws first, then the barrel channel, and then the bedding. Has the gun taken any nasty falls? Could something have happened to break the scope? I have four of the Vx6 and have never had one lay down on me, but everything mechanical can fail.
No bad falls, only fall its had it fell over from its bipods on the carpet.
 
I have a browning x-bolt hells canyon 6.5 creedmoor with 26" barrel with a Leupold vx-6hd 3-18x44. Bought last November, shot excellent out of the box had it shooting sub moa in just a few shots. Between December-March shot approximately 200 rounds, shooting pop cans at 500 and 600 yards consistently, very pleased. Fast forward a few weeks end of March to April and now I can't get it to group at 200 yards anymore. I haven't changed anthing, I've been shooting factory hornady eld match 140. Could the warmer temperatures be affecting it that much. I've checked scope mounts everything is tight. I'm lost and pretty frustrated. Any ideas or thoughts? I included a picture from my previous 200 yard group
is it the same ammo you used last time or new stuff
 
You need to take a few hours and clean and soak that barrel...it probably is copper fouled.........
I cleaned it after every outing pretty extensively. Bristle brush for 6.5, soft brush, then clean white patch until the patch came out without any black residue
 
Top