Base and rings for 30mm tube on Ruger

Jeff in MT

Member
Joined
Jan 12, 2014
Messages
9
Putting a Vortex HS LR with 30 mm tube on Ruger Mark ll and wondering if anyone has recommendation for new bases and rings and what height rings would work. This is a .338 Win Mag elk rifle. Replacing a Tasco and factory rings. Am assuming Ruger doesn't make 30mm rings
 
Putting a Vortex HS LR with 30 mm tube on Ruger Mark ll and wondering if anyone has recommendation for new bases and rings and what height rings would work. This is a .338 Win Mag elk rifle. Replacing a Tasco and factory rings. Am assuming Ruger doesn't make 30mm rings

I am currently using a Burris Ruger-to-Weaver adaptor ( http://www.burrisoptics.com/mounting-systems/mounts-and-bases/ruger-to-weaver-base-adaptorr ) that allows you to use non-Ruger rings.

http://www.longrangehunting.com/forums/f22/ruger-m77-mkii-facelift-range-report-40952/

You can also get picatinny rail (https://www.murphyprecision.com/Products/Item/1132) but has to be custom machined to your rifle (drill and tap receiver).

Weigand (http://www.jackweigand.com/Ruger-M77-MKII-Rifle-Scope-Mounts-No-Drill.html) also makes weig-a-tinny rail but is NOT rfated for .338 WM. It has been a while the last time I contacted them but might be worth checking for any updates.

Good luck!

Ed
 
EGW makes a 20 moa rail. It needs to be D & T'ed. I have one on a short action credmoor...

IMG_4277_zpsdnffpv7g.jpg
 
Warning! This thread is more than 9 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top