280 ai

Jokostel

Well-Known Member
Joined
Dec 1, 2011
Messages
359
Location
Bismarck,ND
Hey all...
Been trying to get some late work done on a project I have coming up...
I ordered a Nosler M48 Patriot in 280 AI.

I've been running the 280 Rem for years... it's old hat.... I simply wanted a bit of change with the AI...
However, it seems that the mindset on propellant is a bit different.
Currently with my 280 Rem (Model 700 Fluted 24in ) Im running 60 Re22 WLR , max length 3.340.... getting an honest 3050fps with a 140 CT... and about .3moa.

Most folks seem to be running ABLR 150s or the 160 AB or the 168 Bergers....
and sticking with I7828 or Re22...
I want to "try" and stick with 150 grain, as 1: I ordered a few boxes of the ABLRs,
and 2: I have a &@!%#&% ton of 150s in 7mm in general...

Was just wondering everyone's thoughts on the propellants... & if Re23 or Re26 is worth entertaining... supposedly they are the "temp-stable" variants of 22 & 25 respectively.
 
I have had good luck with H4831SC with the 150 ABLR, and Ramshot Magnum with the 168 ABLR..
 
H4831 In the past with other cartridges, I haven't had much luck in the accuracy department... IMR was always the winner..gun)
Never fired up 4831SC though...may indeed have to give it a go.
My only fear is that Patriot is a 24in pipe... a lot of these magic " numbers " are all from 26 in pipes...

As long as I can get close to 3k with good pressures and good accuracy, Im happy...
Would almost prefer Hodgdon as you mentioned... as they are a temp stable powder.

Dunno how much I trust Alliants new propellants.... sometimes the best approach is to go with what you used to know...
 
We'll have to crack out that # of rl26 I have in the 7rum's and 7stw on Saturday Jokostel... rl23 may well be the better choice in your 280ai though.
 
I shoot H4831SC in my Cooper 280AI with 168 Bergers. Never tried any other powders as this was very accurate.
 
Warning! This thread is more than 10 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top