XLR Industries

Discussion in 'Rifles, Bullets, Barrels & Ballistics' started by TikkaShooters, Jun 8, 2011.

  1. TikkaShooters

    TikkaShooters Official LRH Sponsor

    Messages:
    387
    Joined:
    May 19, 2010
  2. rscott5028

    rscott5028 Well-Known Member

    Messages:
    2,608
    Joined:
    Apr 18, 2010
    It looks like a well engineered shooting platform at a fair price.

    Hopefully someone can provide some bonified feedback.

    -- richard
     

  3. rinodods

    rinodods Well-Known Member

    Messages:
    249
    Joined:
    Aug 2, 2008
    I've only seen one real review so far. Can't say I've looked much. I think the same thing is posted over at savageshooters forum but here is a link to one as well. I'm sure the guy that wrote it would be happy to answer some questions.

    XLR industries stock | Project Savage
     
  4. TikkaShooters

    TikkaShooters Official LRH Sponsor

    Messages:
    387
    Joined:
    May 19, 2010
    Thanks rinodods! I'll definitely check out that link. I figured this would be a good solution for a Savage build I've been looking at and my Tikka I'm converting into an F(TR) rifle.
     
  5. bogger01

    bogger01 Well-Known Member

    Messages:
    205
    Joined:
    Apr 17, 2010
    i have had a little time with one
    savage ultra mag action


    xlr industries chassis with tactical butt stock
    timney trigger
    boots bolt handle
    ss 20x scope
    warne 20moa scope base
    weaver tactical rings
    30 inch mcgowen barrel
    rws muzzle bralke
    accuracy international cip mags
    hope ya'll enjoy



    [​IMG]
     
  6. TikkaShooters

    TikkaShooters Official LRH Sponsor

    Messages:
    387
    Joined:
    May 19, 2010
    Hi Bogger

    That's a great looking rig! What caliber is it? Did the chassis improve accuracy without bedding?

    I'd love to get my hands on a Savage rum action.

    Thanks for the info!
     
  7. bogger01

    bogger01 Well-Known Member

    Messages:
    205
    Joined:
    Apr 17, 2010
    oh yeah,caliber would be important.its a 338 edge.and the chassis dosn't need any bedding.thanks for the compliment,marty
     
  8. MT4XFore

    MT4XFore Well-Known Member

    Messages:
    708
    Joined:
    Oct 20, 2005
    I did a little shooting with one that housed a 338 AM Tuesday. It provided a VERY stable platform to shoot with. Combined with a large 5 port PK brake, it was extremely comfortable to shoot. Accuracy with it was outstanding too, as one would expect! That is all I can tell you from the very limited shooting I did with it.
     
  9. bogger01

    bogger01 Well-Known Member

    Messages:
    205
    Joined:
    Apr 17, 2010
    was the 338 allen magnum a single shot or was it a repeater that used the chey-tac mags.i had to use the accuracy international c.i.p. mags to make it work with the oal of the 338 edge
     
  10. Len Backus

    Len Backus Administrator Staff Member

    Messages:
    6,356
    Joined:
    May 2, 2001
  11. TikkaShooters

    TikkaShooters Official LRH Sponsor

    Messages:
    387
    Joined:
    May 19, 2010
    Excellent Review!

    Thank you for your thoroughness Marty.

    I'm going to call Kyle and put an order in! gun)
     
  12. bogger01

    bogger01 Well-Known Member

    Messages:
    205
    Joined:
    Apr 17, 2010
    i'm sure you will enjoy it.kyle is a good fella to deal with and his work is top notch
     
  13. MT4XFore

    MT4XFore Well-Known Member

    Messages:
    708
    Joined:
    Oct 20, 2005
    The 338 AM I was shooting was a single shot.