• You must be a Supporting Member to create a listing in the Long Range Hunting Marketplace. To read all the rules, click here.

    We offer multiple options to become a Supporting Member here.

SOLD/EXPIRED WTS Rem 40x 7mmRemMag

George LS

Well-Known Member
Joined
Dec 31, 2007
Messages
123
Location
Pennsylvania
40x 7mm RemMag. Hart stainless steel barrel. Barrel drilled and tapped for iron sites to shoot prone. Small scratch (see photo) near serial number. Shoots 180 Bergers. See photos. Chambered by Howard Wolfe with a 0.313 neck. Kelby base. See photo. The front screw of the back two on the base has a tip broken off in it. Needs to be removed unless you leave the base on the gun. Last fired September 15, 2009 with 24x Leupold. Shot 7 shots within an inch at 100 yards. See photo. $1,000 to your FFL in the lower 48. You pay shipping. U.S. Postal or bank money order only, or pick up with cash. George
 

Attachments

  • IMG_3046.jpg
    IMG_3046.jpg
    120.4 KB · Views: 6
  • IMG_3047.jpg
    IMG_3047.jpg
    145.7 KB · Views: 5
  • IMG_3048.jpg
    IMG_3048.jpg
    108.7 KB · Views: 8
  • IMG_3051.jpg
    IMG_3051.jpg
    131.6 KB · Views: 4
  • IMG_3052.jpg
    IMG_3052.jpg
    115.2 KB · Views: 9
  • Scan 132510002.jpg
    Scan 132510002.jpg
    47.5 KB · Views: 8
Free bump..

For those that are not from this neck of the woods.... Howard Wolfe built some incredibly accurate rifles in his day.
 
Goerge- i miked a couple of my 7mm handloads. .310". so it is a no turn neck i believe. bump.
 
Top