WTS Custom Rem 700 in .721 Firebird SOLD

Discussion in 'Guns For Sale' started by Tomg, Nov 21, 2010.

  1. Tomg

    Tomg Well-Known Member

    Messages:
    761
    Joined:
    Oct 23, 2010
    Here are the details of the gun build.

    The Gun was built by A&A Gunsmithing in Glendale, AZ
    Stock is a McMilian A-4 in Olive Drab green, it has a 13.5" length of pull with 2 flush cup mounts on both sides of the butt. also has the adjustable check piece. I had the versa pod mounting stud installed in the end of the forearm.

    Action is a Remington 700. I had Lilja Precision build the barrel, it a 28.5 inch barrel with the sendero contour and as you can see it's fluted,
    I ordered it in a 1-10 twist. The gun has only fired about 80 rounds and is grouping in the .400 at the moment, I'm sure more time and load development this would be even better.

    As far as the work done on the build here's the list of what I had done:

    Recessed crown
    Install Sako extractor
    Open feed rails to accommodate the .721 Firebird
    Trigger adjusted to clean crisp 2.5 lbs
    Tune and square action
    Lap the bolt lugs
    Pillar Bed and free float the barrel
    Finish in semi gloss Ceracote

    Optics are from Hours it is a 4x16x50mm with the H2 retical I have Leupold Mark V rings and bases.

    I have 6 boxes of new brass and the RCBS dies.

    This whole setup cost me around $ 3,400.00

    I will sell this rig with everything for $2,750.00
    Gun without optics $2,250.00

    Send my you e-mail for photos.

    Tom
     
    Last edited: Dec 18, 2010
  2. Tomg

    Tomg Well-Known Member

    Messages:
    761
    Joined:
    Oct 23, 2010
    Re: WTS Custom Rem 700 in .721 Firebird

    Gun still for sale any offers?
     

  3. Armosino

    Armosino Well-Known Member

    Messages:
    54
    Joined:
    Nov 29, 2007
    Re: WTS Custom Rem 700 in .721 Firebird

    Will you send photos armosino@fdfirm.com, thanks Tom
     
  4. chokestick

    chokestick Well-Known Member

    Messages:
    90
    Joined:
    May 12, 2009
  5. Tomg

    Tomg Well-Known Member

    Messages:
    761
    Joined:
    Oct 23, 2010
    Re: WTS Custom Rem 700 in .721 Firebird

    Photos Sent.
     
  6. coldhunt

    coldhunt Active Member

    Messages:
    39
    Joined:
    Dec 1, 2010
    Re: WTS Custom Rem 700 in .721 Firebird

    Please send pics to gordo99@shaw.ca What make is the trigger?