WTS - 7mm Mag Dies (3 die set)

Discussion in 'Reloading Equipment and Components' started by WV338, Jun 27, 2013.

Thread Status:
Not open for further replies.
  1. WV338

    WV338 Active Member

    Messages:
    31
    Joined:
    Feb 10, 2012
    WTS - Hornady 7mm Mag three die set (Full, Neck, and Seater) with shell holder. The condition is like new.
    $50 shipped in the lower 48.
    Thanks... :)
     
  2. jlvandersnick

    jlvandersnick Well-Known Member

    Messages:
    176
    Joined:
    Jan 17, 2012
    question

    not familiar with 3 die sets....does the seater just seat the bullet

    or is it also adjustable for different neck tensions?
     

  3. WV338

    WV338 Active Member

    Messages:
    31
    Joined:
    Feb 10, 2012
    This is the information from their website...

    Zip Spindle™ Design


    The Zip Spindle™ design on all full length size dies positively locks to eliminate slippage. A series of light threads cut on both the spindle and spindle collet allows you to make incremental adjustments by turning the spindle or you can easily “zip it” up or down for larger movements.
    Smooth Finish

    Internal die profile is precision machined and polished to a smooth finish that delivers reliable functioning without case sticking or excessive friction.
    Lock Rings with Wrench Flats

    The Hornady Sure-Loc™ lock rings clamp around the entire die applying constant pressure across the threads to hold the ring in place. The locking screw tightens the ring without ever coming into contact with the threads, eliminating possible damage from pliers.
    Elliptical Expander

    Superior to “ball expanders,” this Hornady exclusive provides extremely smooth neck sizing and significantly reduces friction and case neck stretch. Internal threading prevents it from pulling loose and the elliptical expander also eliminates the need for a separate expander die for necking-up to the next caliber.
    Seater Adjustment Screw

    Seater adjustment screw easily adjusts for bullet seating depths.
    Retainer Ring

    Locking retainer spring removes in seconds for easy disassembly and cleaning of the die.
    In-line Bullet Seating System

    Our seating system holds the bullet, the case neck and the seating stem in perfect alignment in the sleeve BEFORE the bullet enters the neck of the case. The system includes a floating bullet alignment sleeve, a floating steel seating stem and a built-in crimper for benchrest precision. Bullets are aligned in the sleeve as they enter the die for optimum seating and enhanced accuracy.
    Built-in Crimper

    The built-in crimper gives you the option of crimping without the need for an extra crimp die thus saving a station on your press.
     
  4. jlvandersnick

    jlvandersnick Well-Known Member

    Messages:
    176
    Joined:
    Jan 17, 2012
    good reply and info thanks
     
  5. Timnterra

    Timnterra Well-Known Member

    Messages:
    593
    Joined:
    Oct 18, 2012
    Ill take the die set. Pm incoming
     
Thread Status:
Not open for further replies.