WTS .264 Mag Brass and multiple dies

Discussion in 'Reloading Equipment and Components' started by 10 Spot Terminator, May 17, 2012.

  1. 10 Spot Terminator

    10 Spot Terminator Member

    Messages:
    14
    Joined:
    Sep 11, 2010
    I have a total of 322 .264 Mag brass nearly all Win. and a few Rem. for sale as one lot for a very good price. All brass is cleaned, some fully prepped, some neck sized only. All are sorted , bagged and tagged as to show their current prep state, how many times fired and sized. None sized over 2 times. I kept very good track of my loads and you wont be dissapointed I assure you. The following listing will show the Brass . I am ssking $85.00 for all of the brass and the dies are listed seperately. Shipping not included.

    Thanks for lookin,

    10 Spot

    (36) Rem. cases, 16 are new untouched, 20 fired 1x , clean, unprepped

    (87) Win. cases fired 2x, sized 1x, cleaned , unprepped

    (46) Win. cases fired 2x , are neck sized, trimmed, primer pockets have been uniformed , may need full length sizing if wont chamber

    (74) Win. cases fired factory ammo, cleaned and sized for 1st time, not trimmed , primer pockets need cleaned

    (27) Win. cases from fired factory ammo, cleaned, trimmed, primer pockets uniformed, neck sized only, recommend to full lenth size first

    (20) Win. cases loaded new, fired 1x, cleaned only, no prep work

    (32) Win. cases fired 3x, sized 2x prior, cleaned but no prep work

    RCBS 2 die set $20.00

    Redding series "B" neck sizing die ( less than 100 cases ran through ) $20.00

    Lee Factory Crimp Die ( custom order ) $15.00

    Shippin will be best economy to you , flat rate priority on the brass for sure,,,
     
    Last edited: May 17, 2012
  2. duckdog28

    duckdog28 Member

    Messages:
    12
    Joined:
    Jun 13, 2012
    Still have the brass? Will you separate?

    Thanks

    Ryan
     

  3. 10 Spot Terminator

    10 Spot Terminator Member

    Messages:
    14
    Joined:
    Sep 11, 2010
    Hello Duckdog28 ,

    Are you interested in all of the brass but not the dies or are you asking for just some of the brass ???

    10 Spot
     
  4. Bob L.

    Bob L. Well-Known Member

    Messages:
    182
    Joined:
    Jun 11, 2010
    I'll take both sets of 264wm dies for $40.00 shipped snail mail to Roseburg?
    Thanks
    Bob
     
  5. arcticroad

    arcticroad Member

    Messages:
    17
    Joined:
    Sep 9, 2011
    If you still have the redding neck sizer die, I will take it.