WTB: Savage Bolt and/or Bolt Face and bolt parts

Discussion in 'Gun Parts - Stocks, Barrels, Actions, etc.' started by VjjR, Oct 26, 2010.

  1. VjjR

    VjjR Well-Known Member

    Messages:
    106
    Joined:
    Sep 11, 2010
    I'm looking for Savage bolt with standard bolt face or standard bolt face and firing pin. For both long and short action rifles.

    Thanks,
    Vic
     
  2. pdog06

    pdog06 Well-Known Member

    Messages:
    269
    Joined:
    Sep 27, 2008
    it is usually hard to find just the complete bolt, unless somebody ruined an action somehow and its the only good part left.

    If you dont find any the complete bolt can be ordered right from Midway, Sharpshooter Supply, Numrich Gun Parts, and Stockade.

    The individual parts can also be ordered from the same places, but Midway has a slimmer selection of the parts. I do know SSS and Stockade sell their complete boltheads for about $50. I believe the complete bolt assembly is around $100.
     

  3. TrophyHunter_colorado

    TrophyHunter_colorado Well-Known Member

    Messages:
    581
    Joined:
    Feb 2, 2009
    I have a long action bolt that is brand new but it has a magnum bolt face on it. I know you are looking for a standard but maybe you would still be interested
     
  4. VjjR

    VjjR Well-Known Member

    Messages:
    106
    Joined:
    Sep 11, 2010
    If the price is right i'm always interested. Is it used?
     
  5. larrys92120

    larrys92120 Member

    Messages:
    6
    Joined:
    Aug 2, 2012
    If you still have it, I'm interested.
     
  6. 1000ydshooter

    1000ydshooter Member

    Messages:
    12
    Joined:
    Dec 19, 2011
    I dont want to step on anybodys cheerie-os, but I had a new new new .223
    savage with the new choate stock. ok, I bought it new. varmint rifle, right?
    .223 is a varmint everywhere except wyoming. boy, was I in for a surprize.
    not only to shoot varmints, but to live there also.
    the deal was to change it to 22-250.
    barrel was 1:9 already(new).
    change the .223 to .22-250 bolt face. I did, but the firing pin wouldnt show up.
    I had to drill it. Im thinking the bigger of the two, I drilled it. firing pin, ok, now.
    now for the barrel. I had to ream it out to 22-250. ok, now.
    put the bolt with the go, no-go gages on, slid it in the reciever, put the barrel on , and tightened it down.
    up shot- shot about 100 prairie dogs, 1 coyote, 1 porkypine, 8 skunks.
    aint shot it since 2002. still got it.