WTB 7mm 200gr wildcats

Discussion in 'Reloading Equipment and Components' started by JUDD, Dec 6, 2013.

  1. JUDD

    JUDD Well-Known Member

    Messages:
    935
    Joined:
    Jun 25, 2007
    I know this is an extreme longshot but I'm looking for some of these to stock up on.

    Please PM me if you have any you would part with and how much you want.

    Fingers crossed:D
     
  2. cowboywhorses

    cowboywhorses Well-Known Member

    Messages:
    477
    Joined:
    Mar 14, 2010
    Took me 2 years to fine mine. Wish he would make more bullets. I also have a 192 grain Cutting edge. Very long bullet.

    Good luck

    God Bless

    Jeff
     

  3. JUDD

    JUDD Well-Known Member

    Messages:
    935
    Joined:
    Jun 25, 2007
    I wasn't aware cutting edge made a 7mm bullet that heavy?
     
  4. cowboywhorses

    cowboywhorses Well-Known Member

    Messages:
    477
    Joined:
    Mar 14, 2010
    Yipe I talk with them and they had 500 on the self. So I bought them and now have a 1-7 Proof barrel made for them. Doing a 7mm /338 Norma 35 degree Imp.

    She is a great looking bullet

    God Bless

    Jeff
     
  5. CA48

    CA48 Well-Known Member

    Messages:
    573
    Joined:
    Nov 18, 2009
    Take a look at matrix bullets they make a 190 gr 7mm bullet.
     
  6. JUDD

    JUDD Well-Known Member

    Messages:
    935
    Joined:
    Jun 25, 2007
    Pretty sure Matrix is using a jacket that will not handle the speeds I expect to be pushing this bullet.
     
  7. CA48

    CA48 Well-Known Member

    Messages:
    573
    Joined:
    Nov 18, 2009
    What Cartridge?
     
  8. JUDD

    JUDD Well-Known Member

    Messages:
    935
    Joined:
    Jun 25, 2007
    338 lapua blown out and necked to .284
     
  9. cowboywhorses

    cowboywhorses Well-Known Member

    Messages:
    477
    Joined:
    Mar 14, 2010
    You going with a 35 degree or 40 . I looked at that for project. Had a Allen mag in 7mm liked a lot. Was a light weight gun, but throated for 180 grain bullets.
     
  10. JUDD

    JUDD Well-Known Member

    Messages:
    935
    Joined:
    Jun 25, 2007
    I have to dig out the print. This is a project that died with the shortcomings of the wildcats a couple years ago but I figured I see what I could dig up for bullets and try out a few other possibilities.

    Playing around with my shooter APP cost me money.....:D
     
  11. cowboywhorses

    cowboywhorses Well-Known Member

    Messages:
    477
    Joined:
    Mar 14, 2010
    Would may be do one a Laupa and one on a Norma .

    Was going to buy a reamer for both. Have a cool Norma but may have to throat it longer for the long bullets.

    Would like to look at your print if possilbe.

    Thanks

    Jeff
     
  12. JUDD

    JUDD Well-Known Member

    Messages:
    935
    Joined:
    Jun 25, 2007
    Bump to top
     
  13. JUDD

    JUDD Well-Known Member

    Messages:
    935
    Joined:
    Jun 25, 2007
    BTT