Remodeling the kitchen and looking to add some upended nickel brass in the concrete counter tops as a pot holder. I need 50-60 pieces of once fired nickel .338 WM brass. The brass will be cut off so the butt end is about 1" long, embedded into the concrete with the primer end sticking 1/8" above the counter level. Not sure how it will turn out so we need enough for the job + plus some extras for concrete guy to experiment with to see if its even a good idea.. http://www.woodquarrydesigns.com/im...oads/gallery/hot_pot_rails_detail-734x550.jpg Sort of like this, but with butt ends of the nickel brass. Sort of a unique Alaskan look to the home..... If you got some I'd appreciate it.