J James Jones Well-Known Member Joined Jul 1, 2002 Messages 2,854 Jun 1, 2008 #1 I forthe life of me can't remember what the threads are for the post 64 Winchester M-70. Anbody out their know or have one they can check? I kow its the same as the Ruger 77's
I forthe life of me can't remember what the threads are for the post 64 Winchester M-70. Anbody out their know or have one they can check? I kow its the same as the Ruger 77's
B Bug Active Member Joined Mar 1, 2004 Messages 34 Location Deep East Texas Jun 1, 2008 #2 That's an easy one... 1.0" X 16 tpi.
J James Jones Well-Known Member Joined Jul 1, 2002 Messages 2,854 Jun 1, 2008 #3 Thanks , for some reason I was wanting to say that they were 1.062" x 18TPI
R Rustystud Well-Known Member Joined Dec 25, 2007 Messages 442 Location Youngsville, NC Jun 11, 2008 #4 Winchester threads 1.00" X 16 tpi from the factory, if it has been rebarreled and trued you should measure it. It may and most likely will not be factory spec. Rustystud
Winchester threads 1.00" X 16 tpi from the factory, if it has been rebarreled and trued you should measure it. It may and most likely will not be factory spec. Rustystud