Will the burris fullfield II work ?

Discussion in 'Long Range Scopes and Other Optics' started by pyroducksx3, Mar 3, 2011.

  1. pyroducksx3

    pyroducksx3 Well-Known Member

    Messages:
    782
    Joined:
    Sep 27, 2009
    I recently purchaced a rem 700 in 7 rem mag. The gun is already in a HS stock and came with the burris fullfield II 6.5-20 50 mm 1" tube with burris's ballistic blex. I ve spent money on a new nightforce base, going to be getting seeking rings, and have the redding 3 die competition set, competition shell holders, norma brass. So basically I've sunk a lot of money, well for me anyways, into this already. But all is for not if the scope isnt up to the task. I was also going to send the scope to burris and have them install the tac-2 turrets for 80$. So before I send the scope off and order rings and level for it. Will this scope with the tac-2 turrets installed and 1"tube be adequete for long range hunting? Or should I sell the scope off and try to get into a vortex or something else? I am hoping to dial in yardage and intially get out to 600 yards, with hopes of getting out to 800+. Thanks for the advise
     
    Last edited: Mar 3, 2011
  2. sp6x6

    sp6x6 Well-Known Member

    Messages:
    3,043
    Joined:
    Dec 8, 2009
    Give it a try, nothing to loose.Ihave that scope on a 223.That plex is set up for 150 gr BST@3100.100 TO 600 ON HASHES.You can get own load , check on their web site for hash drops, then compare with your load, can also use a higher zero,2-300yrd. Those #'s 14 x
     
    Last edited: Mar 3, 2011