Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
What seating depth? Seating depth test
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="BlazerBeam" data-source="post: 2607648" data-attributes="member: 106635"><p>Here's a pic of a seating depth test I did at 100 yards with a new 7 mag. 67.5 grains H1000 was the powder charge I settled on prior to the seating test. Question I have is where would you seat the bullet for a final load? The 2.695 CBTO is about 25 thou off and the 2.665 is about 55 thou off. I realize the best group is 65 thou off, but would you load at 55 thou off and hopefully stay in that seating mode as the throat migrated?</p><p>Or would you seat in between them at about 60 thou off? [ATTACH=full]390423[/ATTACH]</p></blockquote><p></p>
[QUOTE="BlazerBeam, post: 2607648, member: 106635"] Here’s a pic of a seating depth test I did at 100 yards with a new 7 mag. 67.5 grains H1000 was the powder charge I settled on prior to the seating test. Question I have is where would you seat the bullet for a final load? The 2.695 CBTO is about 25 thou off and the 2.665 is about 55 thou off. I realize the best group is 65 thou off, but would you load at 55 thou off and hopefully stay in that seating mode as the throat migrated? Or would you seat in between them at about 60 thou off? [ATTACH type="full"]390423[/ATTACH] [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
What seating depth? Seating depth test
Top