webbing

Discussion in 'Gunsmithing' started by bvb2508, Mar 17, 2012.

  1. bvb2508

    bvb2508 Active Member

    Messages:
    42
    Joined:
    Nov 23, 2010
    I am about to duracoat my stock and i am trying to figure out how to get the webbing look with my air brush. Has anyone done this or should i just use the krylon webbing over the duracoat and then clear coat it? Thanks for any help
     
  2. sp6x6

    sp6x6 Well-Known Member

    Messages:
    3,043
    Joined:
    Dec 8, 2009
    Not sure what you are refering, krylon? I got square grid at a fabric shop. Cut to different sizes and taped on in a diagonal fashion. Spray your coat at a 90 to the stock surface or you will mess up pattern
     

    Attached Files:


  3. killitgrillit

    killitgrillit Active Member

    Messages:
    31
    Joined:
    Dec 5, 2011
    Duracoat, krylon webbing and then clear coat.
     
  4. Caleb

    Caleb Well-Known Member

    Messages:
    69
    Joined:
    Jul 10, 2012
    I've never been a fan of Krylon jobs. I've tested it on many surfaces and it doesn't hold up like apoxy based paint jobs. However, the Krylon webbing goes on differently and seems to be extremely durable, but is best over a duracoat, cerakote, or even an aluma hyde job.
     
  5. sj-pratt

    sj-pratt Official LRH Sponsor

    Messages:
    125
    Joined:
    Dec 7, 2006
    I use vieling lacquer then topcoat with acrylic urethane.
    gives me a durable and consistent pattern.
     

    Attached Files: