Weatherby Varmit Sub Moa Vanguard?

Discussion in 'Varmint Hunting' started by TGGUNMAN, Dec 11, 2007.

  1. TGGUNMAN

    TGGUNMAN New Member

    Messages:
    2
    Joined:
    Dec 11, 2007
    I recently acquired this rifle in 22-250...anyone have any experiences with it?
     
  2. Crane

    Crane Well-Known Member

    Messages:
    300
    Joined:
    Nov 27, 2005
    You need to bed it as it really doesn't come in contact with the front pillar. I used a thin washer trimmed with a dremel to shim up the front and used Brownells Steelbed. I also removed the front pressure point on the stock.

    The trigger is impossible to get to an acceptable level and still have the safety engage. I replaced with a Timney which also converts the safety to a three position. HI-SCORE gunsmithing will rework your factory trigger cheaper although I found this out too late. Now the gun is a shooter.