270 WBY Accumark, dies ammo, brass, projos, and parts for sale.
Very accurate rifle that has put a lot of meat in the freezer over the years. I have moved on to other cartridges is the only reason I am selling. Round count is 263. I can provide more and better pictures of the rifle if needed/wanted.
I had the rifle shipped back to Weatherby shortly after I bought it to get an accubrake installed. (this caliber did not come with a brake in 2004)
Timney trigger currently set @ 1.5lbs.
Nightforce 20MOA rail installed
Nightforce 0 MOA rail
Factory trigger.
Brass-WBY headstamp I believe made by Norma-20 1X fired primed w/GM215m's, 40 2X primed w/GM215m's. 57 pieces 1X tumbled nothing else done. 53 pieces 2X nothing done. Total 170.
2 sets of FL dies-Hornady and RCBS
RCBS Trim die
Dewey exact fit Rod Guide
-Factory ammo: 3 boxes Norma 150gr Oryx, 1 box Fed prem 130gr Sierra GK, 1 box WBY 100gr, 2 boxes WBY 130gr Barnes TSX, (My sub MOA handload is with this projo going 3,450) 1 box WBY 130gr spire point, partial box (16 rds) 130 Nos partition, partial 4rds WBY 130 spire point.
-Projos-1 full box Barnes 130gr TSX, plus 25 partial, plus 41 pulled kinectically (totally fine to load). 1 box 140gr failsafes, 85 count 150gr Nos ABLR, 85 count Berger 140 classic hunters. 12 rd sample packs-136gr Fed Edge TLR, 145gr ELDX, and 140gr Sierra Gamechangers.
Reduced my price substantially to $2,000 for the whole enchilada. I do not want to piece anything out. I am located in SE Idaho. If interested please PM me.
Edit: I had a Burris XTR II 4-20X50 34mm, MOA reticle mounted on it in Burris Signature rings w/sunshade and butler creek caps, I will bolt that back on for an additional $800.
Thank you,
PH
Very accurate rifle that has put a lot of meat in the freezer over the years. I have moved on to other cartridges is the only reason I am selling. Round count is 263. I can provide more and better pictures of the rifle if needed/wanted.
I had the rifle shipped back to Weatherby shortly after I bought it to get an accubrake installed. (this caliber did not come with a brake in 2004)
Timney trigger currently set @ 1.5lbs.
Nightforce 20MOA rail installed
Nightforce 0 MOA rail
Factory trigger.
Brass-WBY headstamp I believe made by Norma-20 1X fired primed w/GM215m's, 40 2X primed w/GM215m's. 57 pieces 1X tumbled nothing else done. 53 pieces 2X nothing done. Total 170.
2 sets of FL dies-Hornady and RCBS
RCBS Trim die
Dewey exact fit Rod Guide
-Factory ammo: 3 boxes Norma 150gr Oryx, 1 box Fed prem 130gr Sierra GK, 1 box WBY 100gr, 2 boxes WBY 130gr Barnes TSX, (My sub MOA handload is with this projo going 3,450) 1 box WBY 130gr spire point, partial box (16 rds) 130 Nos partition, partial 4rds WBY 130 spire point.
-Projos-1 full box Barnes 130gr TSX, plus 25 partial, plus 41 pulled kinectically (totally fine to load). 1 box 140gr failsafes, 85 count 150gr Nos ABLR, 85 count Berger 140 classic hunters. 12 rd sample packs-136gr Fed Edge TLR, 145gr ELDX, and 140gr Sierra Gamechangers.
Reduced my price substantially to $2,000 for the whole enchilada. I do not want to piece anything out. I am located in SE Idaho. If interested please PM me.
Edit: I had a Burris XTR II 4-20X50 34mm, MOA reticle mounted on it in Burris Signature rings w/sunshade and butler creek caps, I will bolt that back on for an additional $800.
Thank you,
PH
Attachments
Last edited:
