Using ramshot tac in a .243

Discussion in 'Reloading' started by Wlhofer, Jun 6, 2013.

  1. Wlhofer

    Wlhofer Well-Known Member

    Messages:
    81
    Joined:
    May 3, 2012
    Anybody know of any info on using ramshot Tac in a .243 tc using a Berger 95 grain vld thanx
     
  2. lloydsmale

    lloydsmale Well-Known Member

    Messages:
    991
    Joined:
    Feb 5, 2012
    for me tac has allways burned about the same as blc2 or maybe about in the middle of blc2 and 748. Its a bit fast for 95s int he 243 but im sure it could be made to work.
     

  3. Outlaw6.0

    Outlaw6.0 Well-Known Member

    Messages:
    3,007
    Joined:
    Feb 18, 2010
    TAC is going to be on the fast side for that combo. My Ramshot manual does not list TAC for any bullet in the .243.


    t
     
  4. Wlhofer

    Wlhofer Well-Known Member

    Messages:
    81
    Joined:
    May 3, 2012
    Couldn't find any info but I have lots of tac with powders being hard to find thought I'd try using it H4895 was listed and that's very close to tac
     
  5. Wlhofer

    Wlhofer Well-Known Member

    Messages:
    81
    Joined:
    May 3, 2012
    Thanx guys for info
    I couldn't get her to shoot with h414
    Tried 34.5 gr imr 4895 first group was .425 I'm ok with that
     
  6. jasent

    jasent Well-Known Member

    Messages:
    152
    Joined:
    Nov 16, 2010
    my 243 shoots great with re15 and 58gr vmax,re22 and 105 Berger vld's