Tourque Driver

Discussion in 'Gunsmithing' started by Dskiper, Aug 11, 2013.

  1. Dskiper

    Dskiper Well-Known Member

    Messages:
    214
    Joined:
    Jan 12, 2008
    hello,I'd like to buy a torque-wrench-screwdriver.want to use correct poundage in my own gun work. Any recommended makers or dealers? thanks
     
  2. ICANHITHIMMAN

    ICANHITHIMMAN Well-Known Member

    Messages:
    4,380
    Joined:
    Jan 31, 2008
    Giustaforza family : Effetto Mariposa
     

  3. MontanaRifleman

    MontanaRifleman Well-Known Member

    Messages:
    6,068
    Joined:
    May 21, 2008
  4. newmexkid

    newmexkid Well-Known Member

    Messages:
    591
    Joined:
    Apr 11, 2011
    I also use the Wheeler torque wrench. It does the job when double checked with my neighbors high dollar wrench.
     
  5. Outlaw6.0

    Outlaw6.0 Well-Known Member

    Messages:
    2,996
    Joined:
    Feb 18, 2010
    Snap-on Adjustable Torque driver. 5-40in/lb. Badazz tool, very repeatable, I bought a 1/4" socket adapter & run hex, allen slotted etc. Very handy.

    ~$300.00



    t
     
  6. FEENIX

    FEENIX Well-Known Member

    Messages:
    9,806
    Joined:
    Dec 20, 2008
  7. Sully2

    Sully2 Well-Known Member

    Messages:
    2,480
    Joined:
    Feb 28, 2011
  8. hawk45

    hawk45 Well-Known Member

    Messages:
    174
    Joined:
    Oct 23, 2010
  9. FEENIX

    FEENIX Well-Known Member

    Messages:
    9,806
    Joined:
    Dec 20, 2008
    I too looked into the Borka tool and quite a sleek design. However, I talked myself out of it and went with a simpler design and simpler operation; one hand operation vs. two hand operation, one simultaneous downward pressure and torque force directly onto the screw (one simultaneous motion) vs. two.

    JMHO for OP's consideration.