Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
To build a real accurate Rifle where should a person start.
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Hired Gun" data-source="post: 724465" data-attributes="member: 1290"><p>Here is a crude but effective representation of a barrel block. <a href="http://www.6mmbr.com/gunweek075.html" target="_blank">6.5 "Mystic" Barrel Block F-Classer</a> The barrel is mounted in a block and the action and the rest of the barrel are free floated. It cuts harmonics by reinforcing the barrel and making it effectivly shorter. This makes the lever/barrel shorter and effectively stiffer. </p><p> </p><p>Hollands V-Block was V shaped aluminum block under the barrel that screwed into a sleeve mounted to the barrel with a forward nut threaded onto the barrel. Another cleaner but somewhat less effective is to mount the barrel directly onto a V shaped or epoxy bedded bottom block with 4 1/4-28 screws in a straight section of barrel. The action is then floated in each version.</p></blockquote><p></p>
[QUOTE="Hired Gun, post: 724465, member: 1290"] Here is a crude but effective representation of a barrel block. [URL="http://www.6mmbr.com/gunweek075.html"]6.5 "Mystic" Barrel Block F-Classer[/URL] The barrel is mounted in a block and the action and the rest of the barrel are free floated. It cuts harmonics by reinforcing the barrel and making it effectivly shorter. This makes the lever/barrel shorter and effectively stiffer. Hollands V-Block was V shaped aluminum block under the barrel that screwed into a sleeve mounted to the barrel with a forward nut threaded onto the barrel. Another cleaner but somewhat less effective is to mount the barrel directly onto a V shaped or epoxy bedded bottom block with 4 1/4-28 screws in a straight section of barrel. The action is then floated in each version. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
To build a real accurate Rifle where should a person start.
Top