Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Tikka T3X Lite won't group...help
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Of001" data-source="post: 2018517" data-attributes="member: 116075"><p>A friendand i had the same issue in 308 t3/t3x light and 3006 t3x light. Barrel heat up, stock touching, rifle jump. We've fixed this by bag/bipod placement and holding techniques for range days but for hunting i do the following: </p><p></p><p>If i use a bad i put it half on the mag and use the smallest possible. </p><p>3 shots, general correction, wait a minimum 1h. 2 shots, correction. Go home. New target, 1 shot, at least 2 hours or go home. Same target 1 shot at least 2 hours go home. Same target 1 shot, correct. Go home. 3 shots home. 3 shots home.</p><p></p><p>This gets my scope sighted and shows how far from clean my rifle likes to be. Even when messing about with holding or pressure on the stock it hits where its pointed on 3 quick shots.</p><p></p><p>Its always high right, always, CLEAN cold is about 3-4in up and 3-4 right. 3ish fouling shots brings it to about 1.5 moa up right. And the 6th-9th gets me right on, first is still high right but no more than .25 at 100 and less rham .5in at 200. Following shots are bang on. About .7in at both 100 and 200. At 18 shots its back outside 1moa</p></blockquote><p></p>
[QUOTE="Of001, post: 2018517, member: 116075"] A friendand i had the same issue in 308 t3/t3x light and 3006 t3x light. Barrel heat up, stock touching, rifle jump. We've fixed this by bag/bipod placement and holding techniques for range days but for hunting i do the following: If i use a bad i put it half on the mag and use the smallest possible. 3 shots, general correction, wait a minimum 1h. 2 shots, correction. Go home. New target, 1 shot, at least 2 hours or go home. Same target 1 shot at least 2 hours go home. Same target 1 shot, correct. Go home. 3 shots home. 3 shots home. This gets my scope sighted and shows how far from clean my rifle likes to be. Even when messing about with holding or pressure on the stock it hits where its pointed on 3 quick shots. Its always high right, always, CLEAN cold is about 3-4in up and 3-4 right. 3ish fouling shots brings it to about 1.5 moa up right. And the 6th-9th gets me right on, first is still high right but no more than .25 at 100 and less rham .5in at 200. Following shots are bang on. About .7in at both 100 and 200. At 18 shots its back outside 1moa [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Tikka T3X Lite won't group...help
Top