$650 to me, shipped to your door. Will loan go/no-go gauges if you need. If you're near Anchorage, I'll pull your old barrel and install.
24" featherweight, 1:7.
141 rounds through it. First 100 for break in were a mild load of h100v with 136 Scenar L at 2810 or so that shot very, very well. Other 41 were with a variety of other bullets, mostly Absolute Hammers. All indications are it's a great shooter. Lots of .5" groups with the scenars. 100 pieces of Peterson brass. 50 once fired ready to prime and load. 41 twice fired, 9 once fired ready to load with CCI200 primers. Can share load data if you want it. Barrel always kept cool. Bought this right after I built its twin in 280ai (couldn't decide which, so went with both). Have decided to do something else with this action. The 6.5-284 falls between the CM and the PRC, and is far, far cooler than either. Has one little superficial scratch, and maybe a little smudge from the vice (not sure on that- just a little spot that that looks different near the breech end in some light).
24" featherweight, 1:7.
141 rounds through it. First 100 for break in were a mild load of h100v with 136 Scenar L at 2810 or so that shot very, very well. Other 41 were with a variety of other bullets, mostly Absolute Hammers. All indications are it's a great shooter. Lots of .5" groups with the scenars. 100 pieces of Peterson brass. 50 once fired ready to prime and load. 41 twice fired, 9 once fired ready to load with CCI200 primers. Can share load data if you want it. Barrel always kept cool. Bought this right after I built its twin in 280ai (couldn't decide which, so went with both). Have decided to do something else with this action. The 6.5-284 falls between the CM and the PRC, and is far, far cooler than either. Has one little superficial scratch, and maybe a little smudge from the vice (not sure on that- just a little spot that that looks different near the breech end in some light).
