Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Tightneck 6-284 question
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="winmagman" data-source="post: 115987" data-attributes="member: 1193"><p>Wildcat</p><p>You planning on neck turning or not? If your not neck turning you might want to stay at .276-.278, if your going to turn .268 or .270 would be fine since you can turn off however much brass you need to fit the chamber(to a point).</p><p></p><p>The 6.5-284 Lapua brass I've got has .014-.015 neck thickness, necking down will probably thicken it up a little bit so you would be at a min. .273 with no room for expansion to release the bullet, bad juju.</p><p></p><p>Hope that helps some</p><p>Chris</p></blockquote><p></p>
[QUOTE="winmagman, post: 115987, member: 1193"] Wildcat You planning on neck turning or not? If your not neck turning you might want to stay at .276-.278, if your going to turn .268 or .270 would be fine since you can turn off however much brass you need to fit the chamber(to a point). The 6.5-284 Lapua brass I've got has .014-.015 neck thickness, necking down will probably thicken it up a little bit so you would be at a min. .273 with no room for expansion to release the bullet, bad juju. Hope that helps some Chris [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Tightneck 6-284 question
Top