Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Thoughts on neck turning
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Coyote Shadow Tracker" data-source="post: 2159411" data-attributes="member: 116439"><p>Another thing on neck turning. You can turn the necks even using regular dies. If using match dies with neck sizer bushings use this formula depending on the caliber and thickness of brass turned: Bullet .264 + brass thickness (0.013 x 2 for both sides 0.026) = 0.290 - .002 or 0.003 (for tension reduce neck size)= 0.288 or 0.287 neck bushing size.</p></blockquote><p></p>
[QUOTE="Coyote Shadow Tracker, post: 2159411, member: 116439"] Another thing on neck turning. You can turn the necks even using regular dies. If using match dies with neck sizer bushings use this formula depending on the caliber and thickness of brass turned: Bullet .264 + brass thickness (0.013 x 2 for both sides 0.026) = 0.290 - .002 or 0.003 (for tension reduce neck size)= 0.288 or 0.287 neck bushing size. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Thoughts on neck turning
Top