Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Target/ELR 375 HE..
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="hubel458" data-source="post: 1270285" data-attributes="member: 6474"><p>Here is picture of my freebore checking setup, where we used a throater to</p><p></p><p>make different length freebores in small increments to check bullet fit and</p><p></p><p> find out how far we could get bore rider bullets out of the powder space,</p><p></p><p>The bullet in the barrel is a 400gr MTAC with stupid seal band off, The</p><p></p><p>case behind is with same bullet in it at max length possible and still keep</p><p></p><p>bullet tight in the case, Its overall length is 5.05", can get 185gr dense ball</p><p></p><p>powder under it, settled and.compressed. </p><p></p><p>I'm telling all for absolute top speed, get bore riders,</p><p></p><p> load them out in longer freebore, so you can get speed without pressure </p><p></p><p>problems, as Manson, etc will give you any freebore on reamer you want. </p><p></p><p>If CEBs take off the band so you can use the freebore.</p><p></p><p>Other 600 cases behind need two more neck swage passes and deburring </p><p></p><p>and they are all necked, little polishing, photogenic perfect. Ed</p></blockquote><p></p>
[QUOTE="hubel458, post: 1270285, member: 6474"] Here is picture of my freebore checking setup, where we used a throater to make different length freebores in small increments to check bullet fit and find out how far we could get bore rider bullets out of the powder space, The bullet in the barrel is a 400gr MTAC with stupid seal band off, The case behind is with same bullet in it at max length possible and still keep bullet tight in the case, Its overall length is 5.05", can get 185gr dense ball powder under it, settled and.compressed. I'm telling all for absolute top speed, get bore riders, load them out in longer freebore, so you can get speed without pressure problems, as Manson, etc will give you any freebore on reamer you want. If CEBs take off the band so you can use the freebore. Other 600 cases behind need two more neck swage passes and deburring and they are all necked, little polishing, photogenic perfect. Ed [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Target/ELR 375 HE..
Top