Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Stuck case in chamber
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Its204fast" data-source="post: 1945338" data-attributes="member: 114347"><p>I have a 7MM RM and had the same problem, FL sized, cases would chamber fine, extracting the fired case was a nightmare. when I finally got the case out, it had swipe marks from the bolt turning on the face. I chalked it up to BELT BULGE. I have heard if you have a micrometer or caliper that measures out to .0001 you can measure it. Previously the cases were Neck sized, i noticed some tension opening the bolt so i went and FL sized them, finally I pulled the 10 i had loaded, deprimed the unfired primers and trashed the cases. When the barrel is done on this rifle I'm rechambering for something not belted in the .284 family.</p></blockquote><p></p>
[QUOTE="Its204fast, post: 1945338, member: 114347"] I have a 7MM RM and had the same problem, FL sized, cases would chamber fine, extracting the fired case was a nightmare. when I finally got the case out, it had swipe marks from the bolt turning on the face. I chalked it up to BELT BULGE. I have heard if you have a micrometer or caliper that measures out to .0001 you can measure it. Previously the cases were Neck sized, i noticed some tension opening the bolt so i went and FL sized them, finally I pulled the 10 i had loaded, deprimed the unfired primers and trashed the cases. When the barrel is done on this rifle I'm rechambering for something not belted in the .284 family. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Stuck case in chamber
Top